Kahenraz wrote on 2024-12-28, 03:14:pshipkov wrote on 2024-12-28, 01:41:NV11 only, right ?
if so - ok.NV11 only. Thank you. 🤗
Probably don't want to post your full name and address on the forums. I'm guessing you meant to PM this?
I thought I was responding to a PM. Thank you for notifying me.
Few more things to go.
Gone
agle PC case badge (metal).
After market 5 1/4" drive cabinet for the NEC APC (1). I have the driver board and a manual, but no drivers.
Contact me OFF LIST to arrange to have these shipped at your expense from NJ 08758.
oldhighgerman wrote on 2025-02-22, 08:46:agle PC case badge (metal). […]
agle PC case badge (metal).
After market 5 1/4" drive cabinet for the NEC APC (1). I have the driver board and a manual, but no drivers.
Contact me OFF LIST to arrange to have these shipped at your expense from NJ 08758.
Does the cat ship inside the disk drives or separately? 😉
That so reminds me of the Tandy computer external drive unit I found in a humid Florida garage. In my case the only thing saveable was the controller cart and ribbon cable.
Shagittarius wrote on 2025-02-22, 16:57:Does the cat ship inside the disk drives or separately? 😉
What cat??
liqmat wrote on 2025-02-22, 21:18:That so reminds me of the Tandy computer external drive unit I found in a humid Florida garage. In my case the only thing saveable was the controller cart and ribbon cable.
The drive cabinet could be stripped and repainted. Not a huge affair.
oldhighgerman wrote on 2025-02-23, 01:14:liqmat wrote on 2025-02-22, 21:18:That so reminds me of the Tandy computer external drive unit I found in a humid Florida garage. In my case the only thing saveable was the controller cart and ribbon cable.
The drive cabinet could be stripped and repainted. Not a huge affair.
Nah. Bottom areas of the chassis around the screws crumbled like cake. Both drives had extensive corrosion and the heads were toast. I've done plenty of restoration over the years. I know when to move on.
If the drives themselves were corroded it's a different story
I have a number of old SB-type sound cards I want to part with, and can't bother to try to sell. These are:
16-bit ISA:
PCI:
They all worked once upon a time, but they still look ok visually so chances are high they still work. I'm located in the Netherlands, so shipping goes from there. I'm not sure how this thread works, do people ask here, or DM?
JAL
jal wrote on 2025-03-10, 20:20:I'm not sure how this thread works, do people ask here, or DM?
JAL
I think that's up to you as the donor.
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
jal wrote on 2025-03-10, 20:20:I have a number of old SB-type sound cards I want to part with, and can't bother to try to sell. These are: […]
I have a number of old SB-type sound cards I want to part with, and can't bother to try to sell. These are:
16-bit ISA:
- PRO16PNP ALS100 with clone OPL3 (LS262+LS125A)
- AV310 (CMI8330)
- SB CT4170 [reserved]
PCI:
- ALS300
They all worked once upon a time, but they still look ok visually so chances are high they still work. I'm located in the Netherlands, so shipping goes from there. I'm not sure how this thread works, do people ask here, or DM?
JAL
I'm interested in the Als300 and Als100 cards if they're still available. Also located in the Netherlands btw.
jal wrote on 2025-03-10, 20:20:I have a number of old SB-type sound cards I want to part with, and can't bother to try to sell. These are:
They all worked once upon a time, but they still look ok visually so chances are high they still work. I'm located in the Netherlands, so shipping goes from there. I'm not sure how this thread works, do people ask here, or DM?
JAL
You list your stuff, as you did. Someone wants it and posts and then PM's you where they live so you can figure the shipping to them. They pay shipping and you ship.
That is how it worked for me so far 😀
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
Horun wrote on 2025-03-11, 01:56:jal wrote on 2025-03-10, 20:20:I have a number of old SB-type sound cards I want to part with, and can't bother to try to sell. These are:
They all worked once upon a time, but they still look ok visually so chances are high they still work. I'm located in the Netherlands, so shipping goes from there. I'm not sure how this thread works, do people ask here, or DM?
JALYou list your stuff, as you did. Someone wants it and posts and then PM's you where they live so you can figure the shipping to them. They pay shipping and you ship.
That is how it worked for me so far 😀
Yep.
Also, for US shippers, please don't get ripped off by retail shipping rates. Pirateship can save you 80% or more. And you can ship to Europe for ~15 bucks in most cases. Opening up more swap opportunities. 😀
RetroLizard wrote on 2025-03-13, 01:16:Anybody interested in an ECS D6VAA dual-socket S370 board? I'm thinking 45-50. US only.
Comes with both cpus.
This is only for giveaways. Selling is not allowed.
cyclone3d wrote on 2025-03-13, 01:51:RetroLizard wrote on 2025-03-13, 01:16:Anybody interested in an ECS D6VAA dual-socket S370 board? I'm thinking 45-50. US only.
Comes with both cpus.
This is only for giveaways. Selling is not allowed.
Is proposing paid-for services allowed?
I'd like to ask for money to someone in a thread here.
PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K
"One hates the specialty unobtainium parts, the other laughs in greed listing them under a ridiculous price" - kotel studios
Nexxen wrote on 2025-03-13, 23:42:cyclone3d wrote on 2025-03-13, 01:51:This is only for giveaways. Selling is not allowed.
Is proposing paid-for services allowed?
I'd like to ask for money to someone in a thread here.
Ask Vetz or one of the other admins.....
nevermind,
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
Nexxen wrote on 2025-03-13, 23:42:cyclone3d wrote on 2025-03-13, 01:51:RetroLizard wrote on 2025-03-13, 01:16:Anybody interested in an ECS D6VAA dual-socket S370 board? I'm thinking 45-50. US only.
Comes with both cpus.
This is only for giveaways. Selling is not allowed.
Is proposing paid-for services allowed?
I'd like to ask for money to someone in a thread here.
A couple of weeks ago DosFreak explicitly said multiple times in a forum posting that it is allowed to sell your services on this forum. So you can flood this forum with paid for services announcements as much as you want. If that's a good thing is another discussion IMO.
