VOGONS


First post, by 9646gt

User metadata
Rank Member
Rank
Member

I only have one McCake and I have both a 386SX-16MHz system as well as a486DX2-66MHz system. The 386 has a Yamaha 719 ISA card and the 486 an ESS 1869 card and a Dreamblaster X2GS. The way I am understanding it ( and I may be wrong) is that the majority of games that used the MT-32 should run fine on my 386 (able to slow down for 286 stuff and won't play much of anything before that) and that most MT-32 compatible games that would require the 486 will typically have general midi support anyway.

Is this correct? Should I just install in the 386 build? I guess the fact it is only a SX-16MHz might leave me running across games that support MT-32 and no GM that just won't be able to run at acceptable frame rates on the 386 build. I do have a 486DX4 - 100MHz build with the same GM hardware as well should I choose to use that as my GM machine.

Reply 1 of 4, by Shponglefan

User metadata
Rank l33t
Rank
l33t

It will largely come down to which games you want to use with the MT-32. There are games with worthwhile MT-32 support up to 1994 or so (e.g. X-COM) that would require faster than a 386.

On the other hand the majority of MT-32 games would probably be fine on the 386, since that would reasonably cover gaming up to 1992 or so. For example a lot of your late 80's and early 90's adventure games would be fine on the 386.

Pentium 4 Multi-OS Build
486 DX4-100 with 6 sound cards
486 DX-33 with 5 sound cards

Reply 2 of 4, by badmojo

User metadata
Rank l33t
Rank
l33t

Yes I'd stick it in the 386. In my experience games that need a 486 and offer MT-32 support will also offer GM, so your X2GS will have you covered there.

Great devices those, bless that Dreamblaster. I only have one retro PC so I have both McCake and X2GS in it, with the McCake installed on a PCMIDI card.

Life? Don't talk to me about life.

Reply 3 of 4, by 9646gt

User metadata
Rank Member
Rank
Member
badmojo wrote on 2025-05-22, 04:18:

Yes I'd stick it in the 386. In my experience games that need a 486 and offer MT-32 support will also offer GM, so your X2GS will have you covered there.

Great devices those, bless that Dreamblaster. I only have one retro PC so I have both McCake and X2GS in it, with the McCake installed on a PCMIDI card.

Thank you both for your answers! BadMojo, your answer leaves me with yet another question... for GM music how does your McCake with a decent sound font compare to your X2GS? The reason I ask is I may actually just put my McCake in an external DB15 adapter / enclosure and run it externally. If I could run it with a better MIDI sound font than what the X2GS comes with that would be even better!

Reply 4 of 4, by badmojo

User metadata
Rank l33t
Rank
l33t

Yes that's a good question and I tried to go down that path, but after trying countless sound fonts I couldn't find one that consistent beat the X2GS. There are some amazing ones out there of course but they'd sound awesome with one game, and not quite right with another.

That's a personal opinion of course, it depends on the games you want to play and what you're used to. I'm very familiar with the SC55 sound so that's what I want to hear, and with a little configuring the X2GS sound close to perfect to my ears.

Life? Don't talk to me about life.