How does the Pii overdrive compare to a K6-iii+ \ VOGONS

How does the Pii overdrive compare to a K6-iii+

Topic actions

First post, by old school gamer man

Posted on 2025-06-11, 15:18

old school gamer man Offline

Rank Newbie

Rank: Newbie
Posts: 50
Joined: 2025-06-05, 14:01

So I'm going back and forth on the system I want to build. I always wanted a Ppro system and if I went that rout I would go with a Pii over drive. But I also always wanted to max out of K6-iii+ system too.
I know the sk8 system would lack SD ram and agp but that aside how to the two stack up ?

Thanks!

Reply 1 of 4, by PD2JK

Posted on 2025-06-11, 15:28

PD2JK Offline

Rank Oldbie

Rank: Oldbie
Posts: 978
Joined: 2018-05-28, 08:40
Location: JO32GE

PII Overdrive is 'only' 300/333MHz.

K6-III+ starts at 400 MHz for the embedded version. Yesterday I ran Speedsys with this processor in particular, overclocked a bit.

The attachment DSC_4514.JPG is no longer available

i386 16 ⇒ i486 DX4 100 ⇒ Pentium MMX 200 ⇒ Athlon Orion 700 | TB 1000 ⇒ AthlonXP 1700+ ⇒ Opteron 165 ⇒ Dual Opteron 856

Reply 2 of 4, by old school gamer man

Posted on 2025-06-11, 15:44

old school gamer man Offline

Rank Newbie

Rank: Newbie
Posts: 50
Joined: 2025-06-05, 14:01

so the k6 is a tick faster ?

Reply 3 of 4, by douglar

Posted on 2025-06-11, 16:02

douglar Offline

Rank l33t

Rank: l33t
Posts: 2109
Joined: 2019-11-04, 15:37

old school gamer man wrote on 2025-06-11, 15:44:

so the k6 is a tick faster ?

A K6-III+ @ 550 should have :

a significant advantage on integer code for older games & general usage
a slight advantage in FPU performance for 3d games
a Super 7 platform that supports 100Mhz bus, SDRAM, AGP Graphics & UDMA storage

But a K6 @ 300 would be:

slightly slower at integer code
weaker FPU performance
on any of a wide variety of chipsets, 430FX through Super 7 so the platform can vary greatly, while the socket 8 boards were almost all in a pretty narrow range that had a 66Mhz bus, EDO RAM, PCI graphics & MWDMA storage

Reply 4 of 4, by BinaryDemon

Posted on 2025-06-11, 17:09

BinaryDemon Offline

Rank Oldbie

Rank: Oldbie
Posts: 799
Joined: 2018-01-17, 00:35

I’d guess the K6-3 + would be decently faster.

On YouTube, there’s a comparison of a Tilamook overclocked to 420mhz compared to a standard K6-2 at 420mhz. Generally the K6-2 wins by about 15%, although most of those wins are synthetic tests. The actual game performance seems fairly close.

https://www.youtube.com/watch?v=fqB4yCssUCM

Go to top of page Go to top of page

Back to General Old Hardware