VOGONS


The Ultimate 486 Benchmark Comparison

Topic actions

Reply 340 of 343, by MAZter

User metadata
Rank Oldbie
Rank
Oldbie

Feipoa, I wondering if you ever heard about "TetrisMan's Benchmark" ?

Doom is what you want (c) MAZter

Reply 341 of 343, by feipoa

User metadata
Rank l33t++
Rank
l33t++
MAZter wrote on 2025-06-27, 20:09:

Feipoa, I wondering if you ever heard about "TetrisMan's Benchmark" ?

Never. Would be nice to see the results on some kind of chart.

Plan your life wisely, you'll be dead before you know it.

Reply 342 of 343, by zuldan

User metadata
Rank Oldbie
Rank
Oldbie
Stesch wrote on 2025-06-20, 12:46:
Thanks! I found an photo i've already taken with the CPU jumpers visible, so I made you a little graphic of the jumper settings […]
Show full quote
zuldan wrote on 2025-06-20, 10:18:
Thank you so much! […]
Show full quote
Stesch wrote on 2025-06-20, 10:09:

Hi, of course, when I'm back home, I will take a photo of the cpu jumper block (jp16-22). You can see my benchmarks of the combo a few posts earlier in this thread, including Quake. With a 44,52Mhz FSB (Cyrix running @134Mhz), I get 21.5 FPS in Quake. With the stock 14.318Mhz crystal and a 40Mhz FSB, I get 17.2 FPS

Thank you so much!

Is that with Quake v1.06 or v1.08?

I should have just scrolled up! V1.06. Some nice scores!

Thanks! I found an photo i've already taken with the CPU jumpers visible, so I made you a little graphic of the jumper settings

Screenshot-2025-06-20-143631.png

Thank you! CPU is working.

Reply 343 of 343, by Stesch

User metadata
Rank Newbie
Rank
Newbie
zuldan wrote on 2025-06-29, 08:37:
Stesch wrote on 2025-06-20, 12:46:
Thanks! I found an photo i've already taken with the CPU jumpers visible, so I made you a little graphic of the jumper settings […]
Show full quote
zuldan wrote on 2025-06-20, 10:18:

Thank you so much!

Is that with Quake v1.06 or v1.08?

I should have just scrolled up! V1.06. Some nice scores!

Thanks! I found an photo i've already taken with the CPU jumpers visible, so I made you a little graphic of the jumper settings

Screenshot-2025-06-20-143631.png

Thank you! CPU is working.

Nice, good to hear! Do you have your L2 cache in WT or WB mode? If you want to use it in WB mode, make sure the dirty tag bit is working properly. So far I haven't had a motherboard with a SIS85C471 chipset where this has worked out of the box...

crayon eater (but only the tasty ones)