How to enable an ESS ISA sound card on a Shuttle motherboard AV18 1.3 \ VOGONS

How to enable an ESS ISA sound card on a Shuttle motherboard AV18 1.3

Topic actions

First post, by junak

Posted on 2025-07-11, 18:11

junak Offline

Rank Newbie

Rank: Newbie
Posts: 11
Joined: 2025-05-07, 15:31

Hi, I can't get the sound card to work on this motherboard. It works fine on a socket 7 motherboard. It's not detected here. Does anyone have any ideas?

RETRO Soyo SY-5XA + Pentium 166MMX + 32 MB RAM + S3 Trio 3D 4 MB VRAM + ESS AudioDrive ES 1869F

MODERN MSI MPG Z690 EDGE WIFI DDR4 + I7 12700K (stock UV) + 48 GB RAM 3600 MHz DDR4 + RTX 4070 Ti 12 GB VRAM

Reply 1 of 5, by Grzyb

Posted on 2025-07-11, 19:28

Grzyb Offline

Rank l33t

Rank: l33t
Posts: 2470
Joined: 2019-05-08, 13:47
Location: CET-1CEST-2

There are two replacements for ESSCFG:

1. another version of ESSCFG, you can try these:
Re: Can't use IDE port on BTC 1857i card (version 5.1)
https://web.archive.org/web/20000229161511/ht … vers/driver.htm (version 5.2)

2. UNISOUND

Kiełbasa smakuje najlepiej, gdy przysmażysz ją laserem!

Reply 2 of 5, by Horun

Posted on 2025-07-11, 20:33

Horun Offline

Rank l33t++

Rank: l33t++
Posts: 6890
Joined: 2019-09-19, 02:19
Location: USA

Did you disable the "Onchip sound" in the Advanced setting in BIOS ? just curious....

Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun

Reply 3 of 5, by junak

Posted on 2025-07-12, 05:44

junak Offline

Rank Newbie

Rank: Newbie
Posts: 11
Joined: 2025-05-07, 15:31

Yes Onchip is off but still dosent work, esscfg 5.1 and 5.2.

RETRO Soyo SY-5XA + Pentium 166MMX + 32 MB RAM + S3 Trio 3D 4 MB VRAM + ESS AudioDrive ES 1869F

MODERN MSI MPG Z690 EDGE WIFI DDR4 + I7 12700K (stock UV) + 48 GB RAM 3600 MHz DDR4 + RTX 4070 Ti 12 GB VRAM

Reply 4 of 5, by Grzyb

Posted on 2025-07-12, 09:02

Grzyb Offline

Rank l33t

Rank: l33t
Posts: 2470
Joined: 2019-05-08, 13:47
Location: CET-1CEST-2

What about UNISOUND ?

And what about any software that lists ISA PNP devices? BIOS, HWINFO, Windows 9x ?

Are you sure the ISA slot is OK?

Kiełbasa smakuje najlepiej, gdy przysmażysz ją laserem!

Reply 5 of 5, by junak

Posted on 2025-07-13, 11:20

junak Offline

Rank Newbie

Rank: Newbie
Posts: 11
Joined: 2025-05-07, 15:31

OK, it works. I cleaned the card's contacts with a cloth and it started working. I also cleaned the ISA port with isopropyl alcohol.
Thank you very much.

RETRO Soyo SY-5XA + Pentium 166MMX + 32 MB RAM + S3 Trio 3D 4 MB VRAM + ESS AudioDrive ES 1869F

MODERN MSI MPG Z690 EDGE WIFI DDR4 + I7 12700K (stock UV) + 48 GB RAM 3600 MHz DDR4 + RTX 4070 Ti 12 GB VRAM

Go to top of page Go to top of page

Back to General Old Hardware