Two board combos have been selected for 98SE and ME builds.

- ConRoe865PE/C2D E6850 - Windows 98 SE - GPU Radeon 9800
- AM2NF3-VSTA/Phenom X4 955BE - Windows ME - GPU Geforce 7600

Today, my FIC motherboard got socket for easy DALLAS removal.

Someone must have really insisted on making the ’made in Taiwan’ marking not visible… 😆

Did the initial LOGI PC88XT motherboard inspection
The board has clearly seen better days and shows signs of an unsuccessful past repair, but I’m going to try to bring it back. I started with the obvious: severed traces are restored, questionable ones reinforced, and I’ll reuse the alternative capacitor pads that are in better shape. As you can see it looks not great but most of the pads are good.
Will post an updates here.

Susanin79 wrote on Yesterday, 20:34:

Did the initial LOGI PC88XT motherboard inspection
The board has clearly seen better days and shows signs of an unsuccessful past repair, but I’m going to try to bring it back. I started with the obvious: severed traces are restored, questionable ones reinforced, and I’ll reuse the alternative capacitor pads that are in better shape. As you can see it looks not great but most of the pads are good.
Will post an updates here.

Good job!

DarthSun wrote on Yesterday, 01:03:

Dan386DX wrote on Yesterday, 00:51:

Full reinstall of Windows 98SE on the Socket 7 machine. […]
Show full quote

Full reinstall of Windows 98SE on the Socket 7 machine.

Opening 'My Computer' was causing a full on freeze; at first suspected the CD-ROM as the issue went away when it was removed. But drive didn't cause issues in other machines.

Full reinstall solved it.

But thinking about it, I'm suspicious that the culprit may have been Daemon Tools. I had only recently installed it when the issue began. Possibly caused a driver conflict with real optical drive?

Yes, DaemonTools sometimes caused problems for me too.

Glad I'm not the only one - I've started using a program I hadn't heard of before; Virtual Clone Drive. Version 5.1.1.1 works on Win 9X and is very lightweight, so far no conflicts or issues!

Locutus wrote on Yesterday, 17:57:

Today, my FIC motherboard got socket for easy DALLAS removal. ...

Wow .. looks like your Dallas RTC hasn't had to be delided yet!

I've had to grind the top off almost all of mine (RTC & SRAMs) to replace the internal bettery.