eliot_new wrote on 2025-09-05, 10:01:

I guess, I can boot the PC from WIn 98 SE in DOS mode and run then AWFLASH....

Even better, put all the files you need on C:, reboot, on startup hit F8 and choose “7. safe mode command prompt only”

Ok, I found the download link:

https://www.gigabyte.com/de/Motherboard/GA-BX … support-dl-bios

Before I was on an URL with only one .bin file.

Now I will flash and tell what happened.

PS: I have to say thank you very much to User con 2 botones, who did this post:
Anybody use the unofficial Win 98 SP3 pack?

Thus I resolved a display bug in the Win98SE SP3.

I will write here as soon as I have completed the installation and configuration of my 2 retro PC's with Win98SE, WinXP SP3 32-bit and all my favorite games.

Good evening everybody here

thank you once again for all your answers!

Please help me.

I now have two retro PC systems (see signature).
I can play most of the games I've always wanted on both.
However, some games with EAX sound released after 2005 require more than a 1GHz CPU and more than 512MB of RAM.
Examples of this would be Bioshock or Crysis.
Since I don't want to build a third retro PC, I've been thinking about installing 32-bit Windows XP on my Asus H97M-Plus with an i7-4790K.
I have read online that an user named Fernando provides special drivers for this.
Question: has anyone had any good experience with this?
Has anyone installed 32-bit Windows XP on an H97 or Z97 board and later successfully added an Audigy 1 or 2 sound card?

Thx a lot in advance and I wish you a nice and pleasant weekend!

Kind regards from Switzerland

eliot_new wrote on 2025-10-10, 18:46:

Has anyone installed 32-bit Windows XP on an H97 or Z97 board and later successfully added an Audigy 1 or 2 sound card?

The unofficial “drivers” you are referring to only add inf files for device manager. Would it work if you modify setup media image? Mostly yes. If you want real windows xp support on Intel chipset go H81 or even better B75 since it provides native PCI.

Update:

I have decided to have 2x Retro-PC permanently and several others temporary (discover how it feels then sell it).

1. Asus CUSL2-C, P3 1Ghz, 512MB, FX5600 AGP, SB Audigy 1, Win98SE, WinXP
2. QDI BrillianX S1 440BX, P3 450, 768MB, V3-2k AGP, AWE64, PicoGUS, Win98SE, WinXP => could add an Yamaha 724 PCI as the QDI has SB-link (PC/PCI)

The experimental rigs I am currently planning only for experience reasons and maybe later sell it again:

3. QDI P5I430TX Titan IB+, P 100 Mhz, 32MB, Elsa S3 2MB PCI, FreeDOS => PicoGUS from (2) could be used here
4. Asus P5A rev 1.04, K6-3+/400, 64MB, V3-2k AGP (bought cheap a 2nd one), FreeDOS, Win98SE => AWE64 from (2) could be used here
5. Asus CUV4X-D incl. 2 x P3 1Ghz (got it for 110 € with CPUs) => the seller offers me to buy his remaining 4x512MB SDRAM, but I am hesitating. Even with Win2k, Win2k3, Vista32, Win7x32 I have only a test laboratory. In 2000 there were no games supporting 2x CPUs?

I will surely remain with number 1&2 and will decide what to do with rig 3, 4, 5 in the distant future.

What is astonishing:
currently a lot of people are selling on ebay.de some Voodoo 3 PCI and Voodoo 4 AGP graphics.
The prices for V3 PCI are much higher than V3 AGP, but AFAIK plattforms based upon Intel TX are too slow for a V3 PCI => do you know an use case where a V3 PCI is suitable?
I have also noticed the exagerated prices for alternative 3D graphics Permedia2, PowerVR(Kyro2), Rendition Verite 2200, S3 Savage4 Pro.

eliot_new wrote on Yesterday, 14:43:

5. Asus CUV4X-D incl. 2 x P3 1Ghz (got it for 110 € with CPUs) => the seller offers me to buy his remaining 4x512MB SDRAM, but I am hesitating. Even with Win2k, Win2k3, Vista32, Win7x32 I have only a test laboratory. In 2000 there were no games supporting 2x CPUs?

If the price for the RAM is fine, I'd definitely do it 😎