@Gona, I have yet another test app for you. This runs in protected mode. The run.bat redirects output to out.txt. That probably isn't necessary because the app dumps everything to a file separately. I think you'll have to remove the > out.txt. This *might* just switch your vlb card into graphics mode and take over the display and not exit cleanly. Most probably it won't do anything at all.

If you run it directly this is what you need to use:
dos32a 3dbvlb32 1

https://nirvtek.com/downloads/3DBVLB32.20260512.001.7z
MD5: 4846735a8e12dd7415555a3b81fc75ec

Here it is.

Gona wrote on 2026-05-14, 05:47:

Here it is.

Thanks Gona!

A new and improved Long Beach 2000 is now Rendition Ready:
https://youtu.be/D3vvAhhKlII

Here's second wind vs rready on this track:
https://youtu.be/n3ZDbB8Lzxw

It's very very fast with native cpu speeds. I've thought about speeding up the jit compiler for dynamic /auto core by removing state changes when possible and optimizing memory access.

At the moment the code cache compiles existing c functions for memory access and instruction execution and reuses them. The problem is that the flag register internal to dosbox needs to be updated every instruction and memory access has to be to dosbox memory and the virtual mmu's tlb logic needs to be respected.

I lack the skill to actually compile a legacy bios for virtualisation with cygwin.

Yet another one Gona! The batch file has been fixed.

Run.bat OR
dos32a 3dbvlb32 1

https://nirvtek.com/downloads/3DBVLB32.20260516.001.7z
MD5: 1822f5352ada00ef93f3bf2032b0190f

The current state of VLB support:
https://youtu.be/5wHSriFa_yA
OR
https://www.patreon.com/posts/3d-blaster-vlb- … ntent=join_link

I should interrupt: what's RReady doing now?

Rendition:

Speedy3D
RRedline

3Dlabs:

CGL?

BEEN_Nath_58 wrote on Yesterday, 16:29:

I should interrupt: what's RReady doing now? […]
Show full quote

I should interrupt: what's RReady doing now?

Rendition:

Speedy3D
RRedline

3Dlabs:

CGL?

The 3D Blaster PCI (Rendition V1000) also supports CGL. My original plan was to add support for this as well. I think Raven-05 suggested it and I ran with it. On the RReady store page it's actually said "Support for CGL is planned, but not guaranteed" for over a year now. So yeah, scope creep and Rebel Moon (1995) is a widely requested game (well a few people have asked for it).

It now looks like CGL for the 3DB PCI can be supported *relatively* easily and directly translated to Speedy3D. The VLB is another matter, but I would like to do it anyway.

sharangad wrote on Yesterday, 16:38:

BEEN_Nath_58 wrote on Yesterday, 16:29:

I should interrupt: what's RReady doing now? […]
Show full quote

I should interrupt: what's RReady doing now?

Rendition:

Speedy3D
RRedline

3Dlabs:

CGL?

The 3D Blaster PCI (Rendition V1000) also supports CGL. My original plan was to add support for this as well. I think Raven-05 suggested it and I ran with it. On the RReady store page it's actually said "Support for CGL is planned, but not guaranteed" for over a year now. So yeah, scope creep and Rebel Moon (1995) is a widely requested game (well a few people have asked for it).

It now looks like CGL for the 3DB PCI can be supported *relatively* easily and directly translated to Speedy3D. The VLB is another matter, but I would like to do it anyway.

CGL was for Creative manufactured cards, or native to 3Dlabs Glint? Is there a list of cards supporting this?

BEEN_Nath_58 wrote on Yesterday, 17:18:

sharangad wrote on Yesterday, 16:38:

BEEN_Nath_58 wrote on Yesterday, 16:29:

I should interrupt: what's RReady doing now? […]
Show full quote

I should interrupt: what's RReady doing now?

Rendition:

Speedy3D
RRedline

3Dlabs:

CGL?

The 3D Blaster PCI (Rendition V1000) also supports CGL. My original plan was to add support for this as well. I think Raven-05 suggested it and I ran with it. On the RReady store page it's actually said "Support for CGL is planned, but not guaranteed" for over a year now. So yeah, scope creep and Rebel Moon (1995) is a widely requested game (well a few people have asked for it).

It now looks like CGL for the 3DB PCI can be supported *relatively* easily and directly translated to Speedy3D. The VLB is another matter, but I would like to do it anyway.

CGL was for Creative manufactured cards, or native to 3Dlabs Glint? Is there a list of cards supporting this?

Creative Graphics Library. I think they wanted to make it a standard, but it didn't catch on.

This is the compatibility matrix.:
https://gona.mactar.hu/3D/CGL/

I think it was a combination of Glint and Rendition.