Retest of 0.12 on ASUS EN7600GS VGA BIOS Version 5.73.22.61.AS09

Nvidia kEpler/maxWell/pAscal fiX - NEWAX 0.12.á - NVIDIA mode
Nvidia kEpler/maxWell/pAscal fiX - NEWAX 0.12.á - NVIDIA mode
PCI version: 3.0
PCI specification: 017
PCI buses: 005
Original Logical Scanline Length (4F06h): Supported
Original Display Start Address/Panning (4F07h): Supported
Nvidia graphic card: Detected
NEWAX support: Incompatible Nvidia graphic card detected
PCI_ID: 10DE_0392 - Revision: A1 - SUBSYS_ID: 1043_8231
Bus number: 001 - Device: 00 - Function 0
NEWAX: Not installed

/f
Nvidia kEpler/maxWell/pAscal fiX - NEWAX 0.12.á - NVIDIA mode
Nvidia kEpler/maxWell/pAscal fiX - NEWAX 0.12.á - NVIDIA mode
NEWAX installed

I tested NEWAX 0.12 on my GeForce6200 and it did not install, as expected.

By the way, from the PCI specifications:

6.3.3.1.2. INIT Function Extensions
PC-compatible expansion ROMs contain an INIT function that is responsible for
initializing the I/O device and preparing for runtime operation. INIT functions in PCI
expansion ROMs are allowed some extended capabilities because the RAM area where
the code is located is left writable while the INIT function executes.
The INIT function can store static parameters inside its RAM area during the INIT
function. This data can then be used by the runtime BIOS or device drivers. This area of
RAM will not be writable during runtime.