VOGONS


First post, by myne

User metadata
Rank l33t
Rank
l33t

Anyone found working drivers for this in w98?

I can get the ndis2 drivers working, apparently (haven't tested xfers yet) but all attempts to get the official 9x driver working have failed so far.
It's allegedly supported.

I've looked at the inf, played around. No luck.
It is a little confusing that apparently ALL 9x drivers (at least the ones I've looked at) tell the registry that they are ndis 3 a instead of 5.

If anyone knows of some archive of old rtl drivers, I'll go through them.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 1 of 4, by fosterwj03

User metadata
Rank Oldbie
Rank
Oldbie

The RTL8111C was the last Realtek chip with proper Windows 98 support. Rloew posted on another forum about a driver that works with later chips, but only at 100 Mbps.

Unfortunately, I can't find that post at the moment with the driver information (I've used it in the past). You might need to do an internet search when you have the time.

Reply 2 of 4, by myne

User metadata
Rank l33t
Rank
l33t

Ahhhh patchmem /m might fix it. Cheers

https://github.com/JHRobotics/patcher9x/blob/ … hmem-manual.txt

If the Linux driver is any guide the init routine for D has an extra variable

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 3 of 4, by myne

User metadata
Rank l33t
Rank
l33t

Nope.
Split8mb failed too

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 4 of 4, by fosterwj03

User metadata
Rank Oldbie
Rank
Oldbie

Rloew posted about a beta driver for slightly newer Realtek chips on Msfn.org a while back, but I'm having trouble searching for the post on my phone.

I actually have a copy of the driver at home, but I'm at work for the next few hours.