Repurpose a Cisco Aironet 350 PCI card module as a PCMCIA network card in a 486 laptop? \ VOGONS

Repurpose a Cisco Aironet 350 PCI card module as a PCMCIA network card in a 486 laptop?

Topic actions

First post, by bbence84

bbence84 Offline

Rank Newbie

Rank: Newbie
Posts: 1
Joined: Today, 16:39

Hi! I have found the following PCI network card for cheap on a local auction site:
https://www.vatera.hu/cisco-aironet-350-pci-w … 3505622036.html
It looks as if the wifi module is exactly the same as the PCMCI card of the same name, with the exception of the antenna piece.
Do you think I could remove the module and use it it a 486 laptop? (Siemens Nixdorf PCD-4ND, AFAIK it has a 5V PCMCIA card slot)
Or are these completely different modules?

Thanks!
Bence

Reply 1 of 1, by EduBat

Posted on 18 minutes ago

EduBat Offline

Rank Member

Rank: Member
Posts: 193
Joined: 2021-05-11, 22:24
Location: Portugal

In principle yes, it should physically work.

https://www.cisco.com/en/US/docs/wireless/wla … ide/winicg5.pdf

According to this document there are drivers for W98 and NT. You would need to be running either of these 2 OSes on the 486 so you would need a reasonable amount of RAM.

Go to top of page Go to top of page

Back to General Old Hardware