VOGONS


Reply 2000 of 2018, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

Ok, made some further testing. I haven't looked up the whole thread so there might be some issues already addressed or they are simply due to my machine with the "untested" chipset. I only have checked for the picogus yet. There might be a complete shift if further progress on the machine config ads problems to the picpgus already working on some games/demos.

I have changed the jumper to IRQ7 (which is the LPT port). Irq and DMA are still set to "1". I am not able to change the IRQ for the LPT in the Bios, I can only switch from 378 to 278 or 3BC. Perhaps that will help when I put the LPT to SCSI Adapter on that lpt1 port in order to get the external CDROM working. For the actual testing this device is not plugged in, neither configured or setup (drivers).

Changing IRQ to 7:

1. PicoGus has much less crackling to my ears.
2. BrainSlayer SB-Demos still don't work. Unreal1.0 does not work in SB (crackling) 1.1 is not tested in GUS-Mode.
3. The pinballGames (PDreams2/Fantasies/Illisions) only work in SB Mode, GUS does not work*
4. Other Pinball Games do work (Silverball, Extreme Pinball, EpicPinball)
5. Ultimate BodyBlows does work in SB und GUS but SB sounds much better (game-related, not a fault of the picogus)
6. No demo (NOON) does not work, either DOPE also does not.

*The issue seems to be that the game tells me to rely on the SET Ultrassnd but the values are perhaps wrong. There is no way to tell the sound engine where the GUS really is. Perhaps the game expects "ultra init" from the GUS 4.11 package to be loaded?
The other PinballGames have a different sound engine, they tell my that they found the variable, but I have to say no and change the values for myself. Interestingly they show IRQ11 and DMA7 as standard, perhaps that is what PDreams2/Fantasies/Illusions also get and therefore not work.

My autoexec.bat has three settings
SET BLASTER
SET ULTRASND
SET ULTRADIR

I have two batch files that change the Picogus either in GUS-Mode or SB-Mode. They are called via "call gus / call sb" before starting a game.

GUS.BAT
pgusinit /GUS
pgusinit /gusenv

SB.BAT
pgusinit /SB
pgusinit /sbenv

Example:
start.bat:
CALL GUS.BAT
SILVER

Last edited by dr.zeissler on 2026-11-12, 22:08. Edited 1 time in total.

Retro-Gamer 😀 ...on different machines

Reply 2001 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
dr.zeissler wrote on 2026-11-12, 21:55:

*The issue seems to be that the game tells me to rely on the SET Ultrassnd but the values are perhaps wrong.

What is your ULTRASND variable?

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2002 of 2018, by dr.zeissler

User metadata
Rank l33t
Rank
l33t
NeoG_ wrote on 2026-11-12, 22:07:
dr.zeissler wrote on 2026-11-12, 21:55:

*The issue seems to be that the game tells me to rely on the SET Ultrassnd but the values are perhaps wrong.

What is your ULTRASND variable?

...the values the game engine thinks are wrong...the values itself are right.

The correct one: 240,7,1,1,1
The gus.bat shows me that everything is OK.

Retro-Gamer 😀 ...on different machines

Reply 2003 of 2018, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

I think I better make a YT this weekend on it and link it here.

Retro-Gamer 😀 ...on different machines

Reply 2004 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
dr.zeissler wrote on 2026-11-12, 22:09:

...the values the game engine thinks are wrong...the values itself are right.

The correct one: 240,7,1,1,1
The gus.bat shows me that everything is OK.

AFAIK it should be 240,1,1,7,7

Base address (240), playback DMA (1), recording DMA (1), Ultrasound IRQ (7), SB/MIDI IRQ (7)

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2005 of 2018, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

That explains a lot, thank you. It seems that I have overlooked the different sequence... I'll test this out. Thx!
(On the real cards I always use either 260,7,7,7,7 or 260,3,3,3,3)

Retro-Gamer 😀 ...on different machines

Reply 2006 of 2018, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

Sound-Emulation is working fine now. Thank you, pretty stupid that I messed up the variables.
Next thing will be trying out win95a with SB mode and checking for a USB-Joystick.
Is there a compatibility-listing where I can post games/demos that currently do not work or partial work?

Thx!

Retro-Gamer 😀 ...on different machines

Reply 2007 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
dr.zeissler wrote on 2026-11-14, 17:11:
Sound-Emulation is working fine now. Thank you, pretty stupid that I messed up the variables. Next thing will be trying out win […]
Show full quote

Sound-Emulation is working fine now. Thank you, pretty stupid that I messed up the variables.
Next thing will be trying out win95a with SB mode and checking for a USB-Joystick.
Is there a compatibility-listing where I can post games/demos that currently do not work or partial work?

Thx!

See below post for getting 16-bit audio in windows 95 using SB16 mode

Re: PicoGUS: ISA sound card emulator with Raspberry Pi Pico (Gravis Ultrasound, AdLib, MPU-401, Tandy, CMS)

The github project does have an issue tracker that you an post to, but it requires a github account

https://github.com/polpo/picogus/issues

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2008 of 2018, by TheMysteriousGray

User metadata
Rank Newbie
Rank
Newbie

This may seem like a silly question, but I'm really only asking out of desperation.

I know the PicoGUS has CD-ROM emulation built into it, but can it work alongside an actual CD-ROM? I know I can't connect a CD-ROM directly to it for audio or anything, there's no headers and such, but could I have both the emulated CD-ROM (for audio) and a regular CD-ROM (for data) configured under a DOS environment, or does it need to be strictly one or the other?

Reply 2009 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
TheMysteriousGray wrote on 2026-11-15, 21:44:

This may seem like a silly question, but I'm really only asking out of desperation.

I know the PicoGUS has CD-ROM emulation built into it, but can it work alongside an actual CD-ROM? I know I can't connect a CD-ROM directly to it for audio or anything, there's no headers and such, but could I have both the emulated CD-ROM (for audio) and a regular CD-ROM (for data) configured under a DOS environment, or does it need to be strictly one or the other?

It appears to the system as a physical CD-ROM so just like you can have two physical CD-ROMs, you can have the PicoGUS and a physical CD-ROM. I have it running that way in my system.

It can't occupy the same drive letter, they have to be for example D: and E:

Also it emulates a Matsuhita interface, rather than IDE so you also need to get the correct files for that from the picogus site and add it to config.sys, it won't be picked up by your existing DOS IDE driver.

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2010 of 2018, by rasz_pl

User metadata
Rank l33t++
Rank
l33t++

Remember when I advocated for slapping second $1 p chip on the pcb just in case?

Projects doing heavy audio on pico https://github.com/WeebLabs/DSPi https://github.com/michi71/picovintagesynthcollection
Second one is already running Roland CM-32L mt32emu munt core on rp2350 https://github.com/Michi71/PicoVintageSynthCo … aceCM/README.md

https://github.com/raszpl/sigrok-disk FM/MFM/RLL decoder
https://github.com/raszpl/FIC-486-GAC-2-Cache-Module (AT&T Globalyst)
https://github.com/raszpl/386RC-16 ram board
https://github.com/raszpl/Zenith_ZBIOS Zenith Z-386 MFM-300 ZBIOS disassembly

Reply 2011 of 2018, by polpo

User metadata
Rank Member
Rank
Member
rasz_pl wrote on Yesterday, 04:14:

Remember when I advocated for slapping second $1 p chip on the pcb just in case?

Projects doing heavy audio on pico https://github.com/WeebLabs/DSPi https://github.com/michi71/picovintagesynthcollection
Second one is already running Roland CM-32L mt32emu munt core on rp2350 https://github.com/Michi71/PicoVintageSynthCo … aceCM/README.md

Wow, I had no idea that RP2350 had the horsepower for Munt! PicoGUS Gold (what I'm tentatively calling the next generation PicoGUS) will definitely have multiple RP2350s on it...

creator of PicoGUS and PicoIDE

Reply 2012 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
polpo wrote on Yesterday, 05:18:

Wow, I had no idea that RP2350 had the horsepower for Munt! PicoGUS Gold (what I'm tentatively calling the next generation PicoGUS) will definitely have multiple RP2350s on it...

If there is going to be a hardware revision (PicoGUS MAX would also be cool, leaning on the naming convention of the Ultrasound series), IMO the most requested hardware ability is for the PicoGUS to more neatly integrate into multi sound card setups and accept analog audio from physical CD-ROMs. That could potentially be done with i2c controlled analog volume ICs, they wouldn't consume any load on the pico. If there is a lack of space on the rear bracket it could be a breakout header. Being able to occupy multiple IRQ lines also comes up a lot to say, run mouse emulation and sound at the same time. It would be interesting to hear what hardware directions you are thinking about.

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2013 of 2018, by myne

User metadata
Rank l33t
Rank
l33t

Lol at what point does it just emulate an entire 82371AB and every isa card possible?

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 2014 of 2018, by Duffman

User metadata
Rank Oldbie
Rank
Oldbie
polpo wrote on Yesterday, 05:18:

Wow, I had no idea that RP2350 had the horsepower for Munt! PicoGUS Gold (what I'm tentatively calling the next generation PicoGUS) will definitely have multiple RP2350s on it...

Will a future PicoGUS Gold be able to emulate an AWE64 Gold?

MB: ASRock B550 Steel Legend
CPU: Ryzen 9 5950X
RAM: Corsair 64GB Kit (4x16GB) DDR4 Veng LPX C18 4000MHz
SSDs: 2x Crucial MX500 1TB SATA + 1x Samsung 980 (non-pro) 1TB NVMe SSD
OSs: Win 11 Pro (NVMe) + WinXP Pro SP3 (SATA)
GPU: RTX2070 (11) GT730 (XP)

Reply 2015 of 2018, by crusher

User metadata
Rank Member
Rank
Member

An enhanced PicoGUS with MT32 (MUNT) functionality would just be a dream.
And if it can handle GM/.sf2 soundfonts (via FluidSynth?) as well this would be the ultimate killer card!!!

BTW, is it possible yet to have a dual PicoGUS setup?
One for GUS mode (music) and one for SB (sfx) at the same time?

Reply 2016 of 2018, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
crusher wrote on Today, 07:01:

An enhanced PicoGUS with MT32 (MUNT) functionality would just be a dream.
And if it can handle GM/.sf2 soundfonts (via FluidSynth?) as well this would be the ultimate killer card!!!

You can have that now if you add a wavetable-pi to the card's wavetable header

crusher wrote on Today, 07:01:

BTW, is it possible yet to have a dual PicoGUS setup?
One for GUS mode (music) and one for SB (sfx) at the same time?

It's already possible but with limitations, you can only configure the cards in the system one at a time but two cards can operate in theire respective modes once the configuration is done

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 2017 of 2018, by Damiano.78

User metadata
Rank Newbie
Rank
Newbie

I think it could be very useful to have the opportunity to change by software/firmware the IRQ and DMA assigned to any specific emulation modes of the new PicoGUS Gold card. I mean a sort of "PnP feature" but firmware writable in any configuration modes.
So we are non somewhat limited to assign manually fixed IRQ and DMA with the onboard jumpers.
What do you think about it?

Reply 2018 of 2018, by jmarsh

User metadata
Rank Oldbie
Rank
Oldbie

There aren't enough spare GPIOs for that, plus it would require extra level shifters for each IRQ and DMA line. If it were easy it would have already been done.