VOGONS


First post, by nukeykt

User metadata
Rank Member
Rank
Member

Hi
Released test version of my low-level Roland MT-32 emulator.
It uses LA32 and Reverb chip emulations based on silicon RE, as well as CPU emulator from MAME/Olivier Galibert.
Probably it still has some bugs, but overall sounds pretty good.
Currently only MT-32 rev 2.0 is supported. Other models will be emulated later.
Like Nuked SC-55 it is standalone app that listens to MIDI input port.
You'll need MIDI loopback app (i.e loopmidi or loopbe1) to use it with DOSBox or ScummVM.

Download (Windows):
https://github.com/nukeykt/Nuked-MT32/releases

Source code:
https://github.com/nukeykt/Nuked-MT32

Reply 1 of 5, by MadLynx

User metadata
Rank Newbie
Rank
Newbie

Great work! Do your plans to add other models include the CM-32L or just older versions of MT-32?

Reply 3 of 5, by badmojo

User metadata
Rank l33t
Rank
l33t

Thanks nukeykt!

Life? Don't talk to me about life.

Reply 4 of 5, by ripsaw8080

User metadata
Rank DOSBox Author
Rank
DOSBox Author

Tested some DOS games with DOSBox, and the MT32 emulator sounds very good indeed! A potential cosmetic quirk I noticed is that messages displayed on the LCD with SYSEX messages seem to persist indefinitely until another message replaces the previous one; in other words, it doesn't revert back to the default channel/volume display unless the manual control keys (front panel buttons) are used or the emulator is restarted. I'm not sure if that's authentic behavior or not.

BTW, you can play the built-in demo songs of the 2.0.x control ROM with the control keys; however, it is a bit tricky to press and hold G (Master Volume) at the right moment after launching the emulator in order to get into demo mode. Perhaps nukeykt will add a power button control key, similar to the Sound Canvas emulator, which I think will make the procedure much easier.

Reply 5 of 5, by Cloudschatze

User metadata
Rank Oldbie
Rank
Oldbie
ripsaw8080 wrote on Today, 04:28:

A potential cosmetic quirk I noticed is that messages displayed on the LCD with SYSEX messages seem to persist indefinitely until another message replaces the previous one; in other words, it doesn't revert back to the default channel/volume display unless the manual control keys (front panel buttons) are used or the emulator is restarted. I'm not sure if that's authentic behavior or not.

Oh, that's actually normal/expected. The runtime behavior of a 2.0x ROM MT-32 is such that a displayed message will remain static unless/until:

  • Another SysEx display message is received, replacing the current one
  • Any of the panel buttons are pressed
  • A "display reset" SysEx message is received