VOGONS


First post, by Anaxagoras

User metadata
Rank Newbie
Rank
Newbie

Hi guys!

I guess my CGA monitor is close to dead 🙁 and I have a VGA monitor and an old CRT TV.
I think that I can connect my PC-XT to any of them with the appropriate adapter or card but I don't know which.
Some years ago I had installed a Hercules card with monochrome video out but I lost it.

What of this ways is the best?
- Use the current CGA card --> External converter --> VGA monitor (TFT).
- Use the current CGA card --> External converter --> TV (CRT).
- Replace the current CGA for other CGA card with video out --> TV (CRT).

Maybe exists other options that I miss.

Can anyone address me with this?

Thanks a lot!

Last edited by Anaxagoras on 2026-11-17, 19:39. Edited 1 time in total.

My computers

Reply 1 of 13, by Babasha

User metadata
Rank Oldbie
Rank
Oldbie

ISA8 VGA videocard --> VGA monitor ???

Need help? Begin with photo and model of your hardware 😉

Reply 3 of 13, by Babasha

User metadata
Rank Oldbie
Rank
Oldbie
Anaxagoras wrote on 2026-11-17, 18:48:
Babasha wrote on 2026-11-17, 12:46:

ISA8 VGA videocard --> VGA monitor ???

Thanks Babasha, do you know if VGA card is compatible with CGA games?

I use ISA8 Oak OTI-037 videocard in my XT-based rig and never get any incompatibility now... and in early 90 too)))

Need help? Begin with photo and model of your hardware 😉

Reply 4 of 13, by Jo22

User metadata
Rank l33t++
Rank
l33t++

There are mode utilities that can put early ISA VGA cards into CGA or Hercules emulation modes.
Can be found here: Re: Realtek realtalk, is it the best VGA for CGA? What is?

"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel

//My video channel//

Reply 5 of 13, by zyga64

User metadata
Rank Oldbie
Rank
Oldbie

I can recommend the Trident TVGA9000C card (*). It offers very good compatibility with CGA—and even better compatibility when using the utility program provided by Trident (which can also switch the card into Hercules mode).

(*) 16bit card jumpered to 8bit mode. My card additionally need some rework - ALE signal needs to be disconnected from the ISA ALE signal, and connected to the 5V power signal. As described in Sergey Kiselev's card design (bottom of the page): https://github.com/skiselev/isa-super-vga

8088@8 /640k /TVGA9000C /ALS100+TNDY 3voice
286@20 /4M /CL-GD5422 /CMI8330
486DX33 /16M /TGUI9440 /GUS+ALS100+MT32PI
K6-2@400 /64M /MGA-2064W+3dfx /YMF718
P!!!750 /256M /MX440 /Vibra16s+SBLive!

Reply 6 of 13, by Anaxagoras

User metadata
Rank Newbie
Rank
Newbie
Babasha wrote on 2026-11-17, 20:01:
Anaxagoras wrote on 2026-11-17, 18:48:
Babasha wrote on 2026-11-17, 12:46:

ISA8 VGA videocard --> VGA monitor ???

Thanks Babasha, do you know if VGA card is compatible with CGA games?

I use ISA8 Oak OTI-037 videocard in my XT-based rig and never get any incompatibility now... and in early 90 too)))

Thank you for share your experience 😀
After a quick search on eBay I only found 16 bits ISA cards. I remember having a 16-bit ISA card that worked in an 8-bit ISA slot. Is the same with this?

Jo22 wrote on 2026-11-17, 20:08:

There are mode utilities that can put early ISA VGA cards into CGA or Hercules emulation modes.
Can be found here: Re: Realtek realtalk, is it the best VGA for CGA? What is?

Thank you Jo22. As far as I can saw, to select the emulation mode a program.EXE is needed but, PC-XT only can execute COM files. I'm not quite sure if those cards works in PC-XT 😒

zyga64 wrote on 2026-11-17, 20:23:

I can recommend the Trident TVGA9000C card (*). It offers very good compatibility with CGA—and even better compatibility when using the utility program provided by Trident (which can also switch the card into Hercules mode).

(*) 16bit card jumpered to 8bit mode. My card additionally need some rework - ALE signal needs to be disconnected from the ISA ALE signal, and connected to the 5V power signal. As described in Sergey Kiselev's card design (bottom of the page): https://github.com/skiselev/isa-super-vga

Great! It seems that Sergey Kiselev's card Version 1.1 should work in PC-XT. Where can I order one?
For the other hand, what is the difference between TVGA9000C and TVGA9000I? Can these cards work in PC-XT even if they are 16-bit?

My apologies if I ask to much.

My computers

Reply 7 of 13, by theelf

User metadata
Rank Oldbie
Rank
Oldbie

A cheap trident 9000 are 8bit compatible and have Hercules/CGA/EGA support in any cheap CRT screeen

A win win cheap 100% compatible and fast as hell for a XT

Reply 8 of 13, by wierd_w

User metadata
Rank l33t
Rank
l33t

In addition to 8bit oak vga, one could use early trident tvga cards, and might *try* 8bit serdavision video.

Reply 9 of 13, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Tridents are the easy option, but may not always have the jumper block installed that lets you strap it to 8 bit mode. So if you get lucky it's a simple jumper setting, if you don't, you might need to solder something on.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 10 of 13, by zyga64

User metadata
Rank Oldbie
Rank
Oldbie
Anaxagoras wrote on Yesterday, 14:32:

As far as I can saw, to select the emulation mode a program.EXE is needed but, PC-XT only can execute COM files.

That's not true. XT can execute EXE files as well (of course - why it shouldn't ?).

Anaxagoras wrote on Yesterday, 14:32:

For the other hand, what is the difference between TVGA9000C and TVGA9000I? Can these cards work in PC-XT even if they are 16-bit?

TVGA9000i is more integrated - it even has integrated RAMDAC (8 bit), whereas 9000C can be paired with true color DAC (not that this makes any difference when used with an XT or 286 system).
They both should work in 8bit slot: https://www.vgamuseum.info/index.php/cpu/item … ident-tvga9000i
Those cards linked above have jumper for selecting 8/16 bit mode.

8088@8 /640k /TVGA9000C /ALS100+TNDY 3voice
286@20 /4M /CL-GD5422 /CMI8330
486DX33 /16M /TGUI9440 /GUS+ALS100+MT32PI
K6-2@400 /64M /MGA-2064W+3dfx /YMF718
P!!!750 /256M /MX440 /Vibra16s+SBLive!

Reply 11 of 13, by Ozzuneoj

User metadata
Rank l33t
Rank
l33t

As others have mentioned, an OAK OTI-037 is a good option. I used one in my 5150 to hook it up to a VGA monitor. I think most of them allow you to jumper it for 8bit operation very easily.

It's also a good use for an Oak card like that because they are horribly slow for faster systems, but with a 4.77Mhz 8088 the video card is never going to be the bottleneck. 😀

Last edited by Ozzuneoj on 2026-11-18, 22:16. Edited 1 time in total.

Now for some blitting from the back buffer.

Reply 12 of 13, by Anaxagoras

User metadata
Rank Newbie
Rank
Newbie
zyga64 wrote on Yesterday, 20:10:
Anaxagoras wrote on Yesterday, 14:32:

As far as I can saw, to select the emulation mode a program.EXE is needed but, PC-XT only can execute COM files.

That's not true. XT can execute EXE files as well (of course - why it shouldn't ?).

You are right, I probably thought that because the software installed in my PC-XT is very old, from a time when EXE files didn’t yet exist.

zyga64 wrote on Yesterday, 20:10:
TVGA9000i is more integrated - it even has integrated RAMDAC (8 bit), whereas 9000C can be paired with true color DAC (not that […]
Show full quote
Anaxagoras wrote on Yesterday, 14:32:

For the other hand, what is the difference between TVGA9000C and TVGA9000I? Can these cards work in PC-XT even if they are 16-bit?

TVGA9000i is more integrated - it even has integrated RAMDAC (8 bit), whereas 9000C can be paired with true color DAC (not that this makes any difference when used with an XT or 286 system).
They both should work in 8bit slot: https://www.vgamuseum.info/index.php/cpu/item … ident-tvga9000i
Those cards linked above have jumper for selecting 8/16 bit mode.

I found several of these cards on eBay at reasonable price.

Thanks all for your help!

My computers

Reply 13 of 13, by rmay635703

User metadata
Rank l33t
Rank
l33t

Ibms CGA adapter works natively with a rca composite equipped screen which includes many TVs and commodore monitors.

3rd party CGA usually isn't tv compatible without more work