First post, by Sly_Botts
- Rank
- Member
Hey guys,
I was recently able to purchase a new old stock ASRock 775i65G rev 2.03 motherboard from an eBay auction for a very reasonable price. Everything appeared to be in order except for one capacitor near the CPU. The area where the capacitor is installed is labeled Labeled CE717.
As you can see there's some corrosion at the top.
The recommended replacement is Panasonic EEUFK0J681
Electrolytic Capacitor, FK Series, 680 µF, 6.3 V, ± 20%, Radial Leaded, 3000 hours @ 105°C, Polar
My question is, I have a ton of donor motherboards and a few that I'm probably never going to use ever and probably should be just trashed. I can't find any capacitors on these motherboards that are exactly the same. Should I just order the replacement or is there a possibility of a safe donor capacitor from one of my old motherboards? I also have some brand new Panasonic FS0J332 with a Capacitance of 3300 µF and Voltage of 6.3 V. Original capacitor was four volts but apparently 6.3 volts is safe. Now I know that as long as you meet the minimum capacitance you're safe, but I was just curious if it would be safe to use this capacitor since the capacitance is so much higher or if I should just order the exact replacement. I just don't want to have to go through all the trouble just to order one capacitor.
Thanks for the advice.
It is possible to commit no errors and still lose. That is not a weakness, that is life.