VOGONS


What retro activity did you get up to today?

Topic actions

Reply 32120 of 32130, by Ozzuneoj

User metadata
Rank l33t
Rank
l33t

I am diving into a big lot of cards that need recapped and I'm running into a dilemma...

To recap all of the cards I need around 130 (or more) through-hole electrolytic capacitors of the same size and value... 1200uf 6.3v, 10mm diameter, 12mm height with 4.5-5mm lead spacing. Seems like the originals were almost entirely from the Sacon FZ series. They are "ultra low ESR", so modern low ESR\Impedance caps have higher impedance but might still be okay. What is killing me is the height.

Availability of 1200uf caps that size seems to be decreasing, and the ones that are available are fairly expensive considering how many I need.

I also need a bunch that are 470uf and 1000uf with an 8mm diameter and 12mm height.

What is annoying is that I have a bunch of good 8mm and 10mm diameter caps that are close enough in spec to work but are 15mm in height. 3mm doesn't seem like much, but on an old card with not a lot else on it, they look awkwardly tall, especially the 8mm ones.

It isn't a huge huge deal... but... ehhh... if I'm going to go through the work, I hate to make them look weird.

Spending a bunch on the caps isn't ideal because the cards also have a fair amount of SMD damage and other things that need repaired, so I have no idea how many will be functional. Replacing leaky through-hole electrolytics is definitely the easy part... it's just the parts that can be somewhat expensive. I don't really want to spend $80 on caps for these cards only to have a small fraction of the cards work.

These Rubycon ZLJ caps would probably work for around 32 cents each (which is... okay I guess), but they impedance isn't as low as the originals, and I don't know if they'd be good enough.
https://www.mouser.com/datasheet/3/3655/1/ZLJ.pdf
ZLH have a little lower impedance for 34 cents each (but have low stock, so wouldn't be available for months):
https://www.mouser.com/datasheet/3/3655/1/ZLH.pdf
Panasonic FS are between the two but are 45 cents each... which is getting up there in price for the quantity I intend to buy.
https://industrial.panasonic.com/cdbs/www-dat … BA0000C1255.pdf

And then, there's the other option... dirt cheap polymer caps, like these Honor Elec ones for 15 cents each...
https://www.lcsc.com/product-detail/C48970363.html
... but then I'll have to pay tariffs on them, and tariff processing fees, etc. Not to mention having to wait a while. And I haven't personally switched anything to polymer caps before. I have heard that the leads are thicker, but as far as I can tell the thickness (0.6mm) and lead spacing (5mm) should be comparable to other caps I've been looking at. But I also don't know if they're reliable or not.

Bleh.

Mostly just venting, but if anyone has any suggestions for affordable (and available) caps that fit the bill, let me know.

Now for some blitting from the back buffer.

Reply 32121 of 32130, by gmaverick2k

User metadata
Rank Member
Rank
Member

Started to populate spreadsheet (including retro web hyperlinks) of the parts I have been accumulating over the years. Started with motherboards I have stacked vertically like vinyl records in an Ikea Kallax inside the house. I've still about 10% of motherboards in the garage populated inside cello wrapped builds like the conroe865pe etc that still need to be added to the list. Then I can start populating list of soundcards I have and then GPU's etc... Screenshot of motherboards sorted by release date
The MS5191 super socket 7 board is most nostalgic for me as its the board that came in my first family PC (Time computers K6-2 500, integrated ATi Rage 128 Pro + Creative ES1373)

Main: Z440/E5-1650 V4/3060Ti/64GB/iFi Zen DAC V1/Klipsch ProMedia 2.1 THX/Philips 43PUS8808/12
98/DOS: Shuttle SK41G/AthlonXP 2200+ 1.8GHz/V3 3000/SuperQuad Digital/MU90/SC-55/SC-88 Pro/LG StudioWorks 995E
XP: Thinkcentre Edge 72/i5-3570K/GTX 970/X-FiTi

Reply 32122 of 32130, by douglar

User metadata
Rank l33t
Rank
l33t

Finishing pre-beta testing on a tool to set PIO modes on all software configurable VLB IDE controllers

Reply 32123 of 32130, by PcBytes

User metadata
Rank l33t
Rank
l33t

Tried (and failed) to fix a Satellite Pro 480CDT. Oh well, I'll source another board outta a 460 or 470 and have that run inside, as well as getting it back running since the drive on it has NT4.0, a quite interesting choice for a laptop.

"Enter at your own peril, past the bolted door..."
Main PC: R5 1600, MSI X470 Gaming+ MAX, 16GB RAM, 3TB
98SE : P3 1000, ASUS CUBX-E, 768MB RAM, 80GB

Reply 32124 of 32130, by Thermalwrong

User metadata
Rank Oldbie
Rank
Oldbie
PcBytes wrote on Today, 01:45:

Tried (and failed) to fix a Satellite Pro 480CDT. Oh well, I'll source another board outta a 460 or 470 and have that run inside, as well as getting it back running since the drive on it has NT4.0, a quite interesting choice for a laptop.

Beware of that, the power board is different for the 470/480 and the 460 and earlier ones. I think the housing is mostly the same though.
What happened trying to get it working? Has it got some corrosion around the RTC and standby battery connectors, going down to the underside where a bunch of memory related resistors are?

Reply 32125 of 32130, by myne

User metadata
Rank l33t
Rank
l33t
Ozzuneoj wrote on Yesterday, 07:23:
I am diving into a big lot of cards that need recapped and I'm running into a dilemma... […]
Show full quote

I am diving into a big lot of cards that need recapped and I'm running into a dilemma...

To recap all of the cards I need around 130 (or more) through-hole electrolytic capacitors of the same size and value... 1200uf 6.3v, 10mm diameter, 12mm height with 4.5-5mm lead spacing. Seems like the originals were almost entirely from the Sacon FZ series. They are "ultra low ESR", so modern low ESR\Impedance caps have higher impedance but might still be okay. What is killing me is the height.

Availability of 1200uf caps that size seems to be decreasing, and the ones that are available are fairly expensive considering how many I need.

I also need a bunch that are 470uf and 1000uf with an 8mm diameter and 12mm height.

What is annoying is that I have a bunch of good 8mm and 10mm diameter caps that are close enough in spec to work but are 15mm in height. 3mm doesn't seem like much, but on an old card with not a lot else on it, they look awkwardly tall, especially the 8mm ones.

It isn't a huge huge deal... but... ehhh... if I'm going to go through the work, I hate to make them look weird.

Spending a bunch on the caps isn't ideal because the cards also have a fair amount of SMD damage and other things that need repaired, so I have no idea how many will be functional. Replacing leaky through-hole electrolytics is definitely the easy part... it's just the parts that can be somewhat expensive. I don't really want to spend $80 on caps for these cards only to have a small fraction of the cards work.

These Rubycon ZLJ caps would probably work for around 32 cents each (which is... okay I guess), but they impedance isn't as low as the originals, and I don't know if they'd be good enough.
https://www.mouser.com/datasheet/3/3655/1/ZLJ.pdf
ZLH have a little lower impedance for 34 cents each (but have low stock, so wouldn't be available for months):
https://www.mouser.com/datasheet/3/3655/1/ZLH.pdf
Panasonic FS are between the two but are 45 cents each... which is getting up there in price for the quantity I intend to buy.
https://industrial.panasonic.com/cdbs/www-dat … BA0000C1255.pdf

And then, there's the other option... dirt cheap polymer caps, like these Honor Elec ones for 15 cents each...
https://www.lcsc.com/product-detail/C48970363.html
... but then I'll have to pay tariffs on them, and tariff processing fees, etc. Not to mention having to wait a while. And I haven't personally switched anything to polymer caps before. I have heard that the leads are thicker, but as far as I can tell the thickness (0.6mm) and lead spacing (5mm) should be comparable to other caps I've been looking at. But I also don't know if they're reliable or not.

Bleh.

Mostly just venting, but if anyone has any suggestions for affordable (and available) caps that fit the bill, let me know.

Smt can often fit easy enough on throughole pads.
Not strictly ideal, but should be good enough if you're not a hamfisted ape

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 32126 of 32130, by Hap

User metadata
Rank Newbie
Rank
Newbie

Doing a restoration of this IBM Aptiva 2137-E56 machine I bought a while back without a hard drive. I was going to replace with it with another IDE drive that I had but it was 120GB and I wanted to stick with the original size of 4.2GB. I decided on a SSD SATA 64GB drive with IDE converter adaptor and partition 4.2GB as C: and the rest as storage as G: Certainly not a gaming rig but games of that era would be fun to try out. And I enjoy the challenges along the way. I have this out in my garage where I can play the games using the IBM speakers and subwoofer as loud as I want. Something I haven't done since the late 90's Lol.

Reply 32127 of 32130, by MattRocks

User metadata
Rank Oldbie
Rank
Oldbie

Ah, that's memory triggering!

Using an IBM to play games reminds me of bypassing school/library policies on cold wet rainy days 😉

Branded IBMs were rare in the private homes I knew: just the odd corporate PC in a home-office defended by ironclad angry dad house rules.

Desktop timeline [ MOS 7501 → 68030 → x86(P5/MMX) → x86(K6-2) → x86(K7*) → PPC(G3*) → x86-64(K8) → x86-64(Xeon) → x86-64(i7) ] * lost

Reply 32128 of 32130, by PcBytes

User metadata
Rank l33t
Rank
l33t
Thermalwrong wrote on Today, 03:08:
PcBytes wrote on Today, 01:45:

Tried (and failed) to fix a Satellite Pro 480CDT. Oh well, I'll source another board outta a 460 or 470 and have that run inside, as well as getting it back running since the drive on it has NT4.0, a quite interesting choice for a laptop.

Beware of that, the power board is different for the 470/480 and the 460 and earlier ones. I think the housing is mostly the same though.
What happened trying to get it working? Has it got some corrosion around the RTC and standby battery connectors, going down to the underside where a bunch of memory related resistors are?

Broken CPU pins + RAM resistors. Did save a 128MB upgrade card from it, as well as case + everything else bar mobo.

Last edited by PcBytes on 2026-11-19, 19:27. Edited 1 time in total.

"Enter at your own peril, past the bolted door..."
Main PC: R5 1600, MSI X470 Gaming+ MAX, 16GB RAM, 3TB
98SE : P3 1000, ASUS CUBX-E, 768MB RAM, 80GB

Reply 32129 of 32130, by mtest001

User metadata
Rank Member
Rank
Member
Hap wrote on Today, 06:42:

Doing a restoration of this IBM Aptiva 2137-E56

That case looks fantastic!

/me love my P200MMX@225 Mhz + Voodoo Banshee + SB32 PnP + Sound Canvas SC-55ST = unlimited joy !

Reply 32130 of 32130, by Hap

User metadata
Rank Newbie
Rank
Newbie
mtest001 wrote on Today, 18:38:
Hap wrote on Today, 06:42:

Doing a restoration of this IBM Aptiva 2137-E56

That case looks fantastic!

Yeah it looks like it's been very well cared for. I just had to buy it. Even the inside was just light dust. It was sold without a hard drive and that was all that was wrong with it. I was able to download the recovery disk and I still had a 3.5" floppy boot disk I had downloaded from DON5408's Unofficial Aptiva Support when it was still active many years ago. The software restore process was smooth.