Star Wars - Tie Fighter Collectors CD - audio configuration \ VOGONS

Star Wars - Tie Fighter Collectors CD - audio configuration

Topic actions

First post, by megatron-uk

Posted on 2011-05-30, 12:54

megatron-uk Offline

Rank l33t

Rank: l33t
Posts: 2103
Joined: 2010-09-07, 10:53
Location: UK

I'm having a bit of trouble getting the sound configured on this game.

I'm installing from a CD image of my original boxed copy (the machine doesn't have an optical drive). The install all goes smoothly, when it gets to sound configuration the SB16 is detected correctly and can play both digital and music tests fine. If, however, I choose General MIDI from the music device list, set the correct port for my MPU401 interface OR my DB50 clone via the SB16 waveblaster header and then test it, the machine locks without anything appearing on the lcd of my SC55 module.

This is bizarre, I've not seen any test that uses the midi port actually lock the machine... and in fact the same install and sound configuration procedure using my X-Wing Collectors CD works fine.

Has anyone experienced problems with midi configuration with this version of Tie Fighter before?

(PS. This is obviously real dos on real hardware)

My collection database and technical wiki:
https://www.target-earth.net

Reply 1 of 3, by DonutKing

Posted on 2011-05-30, 23:02

DonutKing Offline

Rank Oldbie

Rank: Oldbie
Posts: 1840
Joined: 2008-01-03, 03:23
Location: Australia

What's your SC55 attached to, is it on the same sound card as your daughterboard?

I had lockups in ROTT and a couple of other games when trying to use an XR385 daughterboard and an SC55 attached to the same sound card. Removing the SC55 seemed to resolve it.
Kind of a pain in the arse because if you want to have both MIDI devices in your machine you need seperate sound cards with seperate IO ports for each MIDI controller, rather than just having them all run off one card and muting the device you aren't using.

If you are squeamish, don't prod the beach rubble.

Reply 2 of 3, by megatron-uk

Posted on 2011-05-31, 07:52

megatron-uk Offline

Rank l33t

Rank: l33t
Posts: 2103
Joined: 2010-09-07, 10:53
Location: UK

I'm using a 100% MPU401 compatible Midiman MM401 using the standard MIDI port 330h with the MT32 and SC55 attached to it - the XR385 is mounted on the SB16 which is jumpered to 300h so that both MIDI interfaces are completely seperate and I can use either of them without having to remove or recable anything.

No problems seen with any other games - I just installed a few new games over the weekend: the aforementioned XWing and Tie Fighter Collectors CD versions, Descent 1 & 2 and Albion. All of them work with every combination of my sound cards (either of the GUS or SB16 for effects and music, or either of the GUS or SB16 and one any of the 3 MIDI 'modules': XR385/MT32/SC55) - apart from Tie Fighter, which locks the configuration screen when I test the General MIDI selection (either using the SB16 300h port, or the Midiman using 330h)

My collection database and technical wiki:
https://www.target-earth.net

Reply 3 of 3, by nuclear7

Posted on 2025-07-19, 20:57

nuclear7 Offline

Rank Newbie

Rank: Newbie
Posts: 2
Joined: 2025-07-16, 19:57

Hello! Sorry for necro-ing, but couldnt find anyone else with the same issue i'm facing with Tie fighter! Could you find a fix? Same thing happens on dark forces.

Go to top of page Go to top of page

Back to DOS