If the second Sound Blaster is PnP, it should work!

Just create batch files that will load the drivers for each card. While I don't use two cards in my machine, I use batch files to load everything, from the CD driver, to Mouse, AWE64 drivers...

But going through 2 line-ins and mixers the resulting signal might not have the best quality.

What many use is a Stereo mixer. I got a 4 channel model, costs around $100 but it's well worth it.

I have a SB16 pnp card, GUS-ACE and the third I wish to get going, is eighter Creative Ensonic AudioPCI or SB-Live.
What I can't figure out, is to make that batch-file and I think the SB-Enviroment lines for each Creative card's would
conflict as I fear that they would configure same IRQ's DMA's etc for both cards at the same time.

You won't have them at the same time. You "turn on" whatever card you need through batch files. But I believe this ins't what you're after.

That is true. Not what I am after. 😁
Just want to see if it is possible to utilize the wave-table portion of a pci card, in a some sort of strange frankenstein sollution. 😁
Think of it, as an alternative daughterboard sollution. 😉

The trouble is finding a PCI card that works in dos properly with wavetable GM.
Most of them only work in a 9x dosbox.
I combine a SB LIVE or another PCI card with an ISA card anytime I can, but I only use the PCI card in windows.

AlphaWing wrote:

The trouble is finding a PCI card that works in dos properly with wavetable GM.
Most of them only work in a 9x dosbox.
I combine a SB LIVE or another PCI card with an ISA card anytime I can, but I only use the PCI card in windows.

You can use Aureal Vortex 2 with a GM daughterboard.

bristlehog wrote:

You can use Aureal Vortex 2 with a GM daughterboard.

Very True, would Need a GM daughterboard tho. 🤣