VOGONS


First post, by Paadam

User metadata
Rank Member
Rank
Member

I would need a close-up photo of Intel OR840 system board, more specifically the are near VRM module. I marked the area, could someone please take a photo of this area, as sharp and good as possible?

Would really appreciate this, my board seems to have a missing component there and damaged PCB trace.

Many 3Dfx and Pentium III-S stuff.
My amibay FS thread: www.amibay.com/showthread.php?88030-Man ... -370-dual)

Reply 1 of 4, by luckybob

User metadata
Rank l33t++
Rank
l33t++

BOOM!

http://imgur.com/38Ss1HV
http://imgur.com/sZjswGx

The silver VRM is removable, just pull gently and it should pop out. Sorry, I cleaned the board with alcohol and there was a bit leftover when i took the pic.

Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them. - Reverend Mother Gaius Helen Mohiam

Reply 2 of 4, by Paadam

User metadata
Rank Member
Rank
Member

Thank you!!! Yours appears to be IBM Intellistation one, just like mine (regular OR840 differs a bit).

Seems that my board is defective after all. Boots but is unstable, has to be related to the damage. Would you sell/trade yours to me? 😀

Many 3Dfx and Pentium III-S stuff.
My amibay FS thread: www.amibay.com/showthread.php?88030-Man ... -370-dual)

Reply 3 of 4, by luckybob

User metadata
Rank l33t++
Rank
l33t++

I'm not prepared to let it go at this time. At least not anywhere close to a reasonable amount. sorry.

Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them. - Reverend Mother Gaius Helen Mohiam