VOGONS


First post, by Paadam

User metadata
Rank Member
Rank
Member

I would need a close-up photo of Intel OR840 system board, more specifically the are near VRM module. I marked the area, could someone please take a photo of this area, as sharp and good as possible?

Would really appreciate this, my board seems to have a missing component there and damaged PCB trace.

Many 3Dfx and Pentium III-S stuff.
My amibay FS thread: www.amibay.com/showthread.php?88030-Man ... -370-dual)

Reply 1 of 4, by luckybob

User metadata
Rank l33t++
Rank
l33t++

BOOM!

http://imgur.com/38Ss1HV
http://imgur.com/sZjswGx

The silver VRM is removable, just pull gently and it should pop out. Sorry, I cleaned the board with alcohol and there was a bit leftover when i took the pic.

It is a mistake to think you can solve any major problems just with potatoes.

Reply 2 of 4, by Paadam

User metadata
Rank Member
Rank
Member

Thank you!!! Yours appears to be IBM Intellistation one, just like mine (regular OR840 differs a bit).

Seems that my board is defective after all. Boots but is unstable, has to be related to the damage. Would you sell/trade yours to me? 😀

Many 3Dfx and Pentium III-S stuff.
My amibay FS thread: www.amibay.com/showthread.php?88030-Man ... -370-dual)

Reply 3 of 4, by luckybob

User metadata
Rank l33t++
Rank
l33t++

I'm not prepared to let it go at this time. At least not anywhere close to a reasonable amount. sorry.

It is a mistake to think you can solve any major problems just with potatoes.