Reply 920 of 1348, by cyclone3d
- Rank
- l33t++
Now we have an Inspiron 530 with an E7300 CPU. Motherboard looks good. Only tested to POST.
Now we have an Inspiron 530 with an E7300 CPU. Motherboard looks good. Only tested to POST.
Next is an Optiplex 780. CPU is a Pentium Dual Core. Motherboard looks fine. Only tested to POST.
Almost there:
Now we have an Optiplex GX620.
And lastly we have a Dell Optiplex 755 with a Core 2 Duo CPU. Motherboard looks fine. Only tested to POST.
I wouldn’t mind the first one but shipping costs would probably make it impractical, so good luck to everyone else 😀 The last dells are almost as new as my current main PC!
Bumping since all these are still available.
Last bump for these computers before I part most of them out and stick the cases and boards out to the curb.
Check the previous page as well as some of them are there.
cyclone3d wrote on 2020-11-26, 07:33:And lastly we have a Dell Optiplex 755 with a Core 2 Duo CPU. Motherboard looks fine. Only tested to POST.
I would like this please, if shipping is affordable. I would be preparing it a gift for a friend who wants a media player PC
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
debs3759 wrote on 2020-11-28, 20:03:cyclone3d wrote on 2020-11-26, 07:33:And lastly we have a Dell Optiplex 755 with a Core 2 Duo CPU. Motherboard looks fine. Only tested to POST.
I would like this please, if shipping is affordable. I would be preparing it a gift for a friend who wants a media player PC
Just checked with USPS, UPS and Fedex. Cheapest was USPS at almost $100 US.
So most definitely not worth it to pay for shipping for one of these overseas. This little thing is heavy at 14.5 pounds and shipping weight would be around 16 pounds.
For shipping in the continental United States, my guess would be that most of them would be $25 - $35 to ship through Fedex or UPS.
You're right, that would be too much for me to pay. Thanks for checking.
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
Ok, so the desktops are off the table. Sticking all but the Lenovo out by the road. Already pulled what I wanted from them.
Next up is hopefully some more interesting stuff that people will actually want.
Not limiting to only one per person. Again, you pay shipping.
First, some Apple cards.
Apple IIE 80COL/64K Memory Expansion with no memory chips:
Power Macintosh 6100/60 NUBUS Adapter Card - this has a couple damaged traces on the back and a few legs of the big chip are bent as well as a few that have been disconnected from the board:
If somebody wants it, I should be able to repair it fairly quickly but I have no way to test it.
--------------------------------
Compaq 003560-001 256KB cache module. I know somebody on here mentioned that these are terribly hard to find. I have no way to test it so if you have a system that can use it, have at it:
I will double check to make sure I don't have a board that this works in before sending it out.
-------------------------------
Epson Equity I+ AGN-MT ISA board
------------------------------
Unknown board - It has a female 9-pin connector. Is this an MCA card? Anybody know what it is?
Now for some PC Jr boards. I've no way to test them.
Almost forgot... 3x Compaq 286 motherboards. Only 1 has BIOS chips but 2 of them do have CPUs - both 12Mhz. One intel and one AMD.
One has a bit of RAM.
Probably want to ship these all to the same person so they can at least get 1 going... maybe all of them.
The power supply for these is proprietary, but the boards have the voltages listed on the connectors so I think it should be possible to wire up a regular AT power supply:
cyclone3d wrote on 2020-11-30, 05:46:Unknown board - It has a female 9-pin connector. Is this an MCA card? Anybody know what it is?
Wow, what is that? ISA or PCI?
hwh wrote on 2020-11-30, 08:03:cyclone3d wrote on 2020-11-30, 05:46:Unknown board - It has a female 9-pin connector. Is this an MCA card? Anybody know what it is?
Wow, what is that? ISA or PCI?
Ya know what, it never even occurred to me that the other side could be ISA... Hmmm
Edit: Found it. It is a Wireless LAN adapter for MCA and ISA. The transmitter / receiver is supposed to plug into the 9-pin port on the back of the card
Here is some actual info:
http://ohlandl.ipv7.net/NIC/Wireless_LAN.html
Potentially interested in the Compaq cache module. I have a cache less ProLinea 5100e that could use it in case it’s compatible. I’ll check what it accepts and report back.
Might be interested in the motherboards. I'm mostly interested in the CLCC board (the third one). Are you willing to use Parcel Monkey for shipping if it's cheaper than USPS (I think it is for that weight)?
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
Seems like that cache module is for a Prosignia VS 486 PC, which I don't have unfortunately. However if no one else wants it and the alternative is to throw it away then I'll take it on the very remote chance I obtain a Compaq Prosignia VS some day.
debs3759 wrote on 2020-11-30, 09:13:Might be interested in the motherboards. I'm mostly interested in the CLCC board (the third one). Are you willing to use Parcel Monkey for shipping if it's cheaper than USPS (I think it is for that weight)?
Ok. So for all 3 shipped via Parcel Monkey, it looks like it would be $43.47 US - shipping weight for all 3 is 7 pounds.
For only one of them, it would probably be around $30-35. I would need to weigh a single boxed up.
devius wrote on 2020-11-30, 17:01:Seems like that cache module is for a Prosignia VS 486 PC, which I don't have unfortunately. However if no one else wants it and the alternative is to throw it away then I'll take it on the very remote chance I obtain a Compaq Prosignia VS some day.
Ok, I'll wait to see if anybody else wants it that has a machine that it will fit.
I wouldn't be throwing it away if nobody wants it. Not like that piece takes up much space.