Spitz wrote on 2022-12-20, 21:56:
Sorry for my late tests. I lied, I do have K6-II 400 not 450.... Anyway, here are some test results. I doubt that K6-2 are slow. […]
Sorry for my late tests. I lied, I do have K6-II 400 not 450.... Anyway, here are some test results. I doubt that K6-2 are slow. Problem is your IGP and that's why IMO you are having those issues... Plus You have a frankenstein small PC not a regular one (for example so-dimm ram). Try to disable somehow this bloody integra. Maybe in BIOS you can set ram amount to 0 which will.mean that it is shut down..
Test made without univbe, FSB 100Mhz, 512KB cache, S3Savage4 8MB, mobo Freetech P5F93, 512MB RAM.
Quake 320 1.06, Doom High, all other test for fast PC's (Phils benchmarks)
Sth to add:
This guy mention that it has bad GPU supprt, and it does like TNT2 cards... (???)
Like i said, the IGP is very fast, any PCI GPU i use is same or slower
At 400 you K6 is slight faster than mine in FPU, and slower than mine in ALU for what i see in your pictures. I see a big difference in Ram speed... 300mb/s vs 100mb/s i have, are you sure is correct?
I think you run quake at 320x200
and Doom shareware 1.9
I think this numbers are more or less the ones mwdmeyer check with a SIS vs Soltek board, that is 1.28 time slower
If i get 55.5 in sis in the soltek will be like 55x1.28 = 71.04
71.04 at 450mhz is 63fps at 400, more or less what do you get
But my Mendocino a 66mhz bus and 333mhz, i get 86fps in quake!!!! to have 86fps in a K6-2 even in a good board i will need something like 550mhz and 650mhz in a sis
This make sense in fusion, when i feel is like half speed my mendocino