VOGONS

RReady (Rendition Verite wrapper) Test Build (Alpha 1)

Topic actions

Reply 520 of 3188, by RaVeN-05

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie
*****************************************************************************
Pre-entry (Int 15h)(Call 1) AX 0000, BX BFDE, CX 0008, DX 035F, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
On exit (2) AX 8600, BX BFDE, CX 0008, DX 035F, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, FLAGS 7A83
*****************************************************************************
*****************************************************************************
Pre-entry (Int 15h)(Call 2) AX 0000, BX BF01, CX 11C0, DX 0011, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
On exit (2) AX 8600, BX BF01, CX 11C0, DX 0011, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, FLAGS 7A83
*****************************************************************************
*****************************************************************************
Pre-entry (Int 10h)(1) AX 158D, BX 0000, CX 0000, DX 0000, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
On exit (2) AX 0015, BX 0000, CX 0A2C, DX C000, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, FLAGS 7246
*****************************************************************************
Rendition Segment 0000C000, Rendition Base 00000A2C
Pre-entry (Int 1ah)(1) AX B101, BX 0000, CX C000, DX 0A2C, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0011, BX 0210, CX C001, DX 4350, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, flags 7246
*****************************************************************************
Searching for Rendition Verite V1000
Pre-entry (Int 1ah/vQuake) (1) AX B102, BX 0000, CX 0001, DX 1163, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 8602, BX 0201, CX 0001, DX 1163, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, flags 7247
*****************************************************************************
Not found
Searching for Rendition Verite V2000
Pre-entry (Int 1ah/vQuake) (1) AX B102, BX 0000, CX 2000, DX 1163, ES 15E6, DI 0006, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0002, BX 0100, CX 2000, DX 1163, ES 15E6, DI 0006, DS 1620, SI 0000, SP 0FD4, flags 7246
*****************************************************************************
Found V2000 bus # 1, dev num 0
Pre-entry (Register read) (1) AX B108, BX 0100, CX 0000, DX 0000, ES 15E6, DI 000B, DS 1620 SI 0000, SP 0FD4, FLAGS 7216
Int 1ah on exit (2) AX 0008, BX 0100, CX 0003, DX 0000, ES 15E6, DI 000B, DS 1620, SI 0000, SP 0FD4, flags 7216
Read register[000B] = 03*****************************************************************************
Pre-entry (Register read) (1) AX B108, BX 0100, CX 1620, DX 0000, ES 15E6, DI 0013, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0008, BX 0100, CX 16DE, DX 0000, ES 15E6, DI 0013, DS 1620, SI 0000, SP 0FD4, flags 7246
Read register[0013] = DE*****************************************************************************
Pre-entry (Register read) (1) AX B108, BX 0100, CX 1620, DX 0000, ES 15E6, DI 0015, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0008, BX 0100, CX 16D0, DX 0000, ES 15E6, DI 0015, DS 1620, SI 0000, SP 0FD4, flags 7246
Read register[0015] = D0*****************************************************************************
Pre-entry (Register read) (1) AX B108, BX 0100, CX 1620, DX 0000, ES 15E6, DI 003C, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0008, BX 0100, CX 160B, DX 0000, ES 15E6, DI 003C, DS 1620, SI 0000, SP 0FD4, flags 7246
Read register[003C] = 0B*****************************************************************************
Pre-entry (Register read) (1) AX B108, BX 0100, CX 1620, DX 0000, ES 15E6, DI 0004, DS 1620 SI 0000, SP 0FD4, FLAGS 7246
Int 1ah on exit (2) AX 0008, BX 0100, CX 1607, DX 0000, ES 15E6, DI 0004, DS 1620, SI 0000, SP 0FD4, flags 7246
Read register[0004] = 07*****************************************************************************

https://www.youtube.com/user/whitemagicraven
https://go.twitch.tv/whitemagicraventv

Reply 521 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

Thanks Agent. Hopefully the reg values should be the same as a V2000. Even if they're not the V1000 values are the ones that're going to be used, since Speedy3d works best on V1000.

I'll be plugging these into my dosbox test harness soon.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 522 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

I think values 2 and 3 are the io port numbers (16 bit when combined) . I have the RTEST values from before so I'll check in a bit.

Thanks Raven.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 523 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

Raven from your RTEST resukts:

****************************************
Board # 1
Verite ID 0x2000
IoBase 0xd000
MemBase 0xde000000
MemMappedIoBase 0xdd000000
memSize 4194304
IOBase 0xd000
BusMaster 0x1
VGA Device 0x1
****************************************

0xde and oxd0 are the upper bytes of mem base and io base.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 524 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

Agent could you run RTEST. Exe from Windows on your V1000 and post the results? I can't find it in this thread.

RTEST is available here:

https://1drv.ms/u/s!As-dKk-N73dSlmafg4OhhQ3_osXs?e=N7TkT8

Your membase should be E8000000 and iobase should be e100 (maybe swapped)

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 525 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

No need, I think this is your result:

****************************************
Board # 1
Verite ID 0x1
IoBase 0xe800
MemBase 0xe1000000
MemMappedIoBase 0x0
memSize 4194304
IOBase 0xe800
BusMaster 0x1
VGA Device 0x1
****************************************

Press [ENTER] to close

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 526 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

See if this runs or locks up. I also needs the VESABlock.txt file, if it exits

https://1drv.ms/f/s!As-dKk-N73dSlkAMo-Zu9Ad0nTvO
MD5: f76b9bfffb6770ff3291fd66adba1ecc

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 527 of 3188, by Agent of the BSoD

Posted on 
User metadata
Rank Member
Rank
Member

That link doesn't go to a file.

Pentium MMX 233 | 64MB | FIC PA-2013 | Matrox Mystique 220 | SB Pro 2 | Music Quest MPU Clone | Windows 95B
MT-32 | SC-55mkII, 88Pro, 8820 | SB16 CT2230
3DFX Voodoo 1&2 | S3 ViRGE GX2 | PowerVR PCX1&2 | Rendition Vérité V1000 | ATI 3D Rage Pro

Reply 529 of 3188, by Agent of the BSoD

Posted on 
User metadata
Rank Member
Rank
Member

Complete lockup. No text is ever saved to a text file.

Pentium MMX 233 | 64MB | FIC PA-2013 | Matrox Mystique 220 | SB Pro 2 | Music Quest MPU Clone | Windows 95B
MT-32 | SC-55mkII, 88Pro, 8820 | SB16 CT2230
3DFX Voodoo 1&2 | S3 ViRGE GX2 | PowerVR PCX1&2 | Rendition Vérité V1000 | ATI 3D Rage Pro

Reply 531 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

https://1drv.ms/u/s!As-dKk-N73dSmBoMo-Zu9Ad0nTvO
MD5: 4fd08746b7e156ba9b652bc3f1e8bee4

That should do it. It takes a bit of adjusting to get used to FP_SEG and FP_OFF and MAKE_FP. I haven't used those in decades.

[EDIT] Needs the VESABLOC.txt file as well as setmode output.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 534 of 3188, by RaVeN-05

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

what do you think? about Whiplash in configuration menu has switch between 4meg and probably 8meg as chat told me on stream, but 8mb is not even show, i think this can be confusion since Speedy3D first introduced in v1000 and v1000 probably newer has 8mb?

https://www.youtube.com/user/whitemagicraven
https://go.twitch.tv/whitemagicraventv

Reply 536 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t
RaVeN-05 wrote on 2024-03-04, 10:45:

what do you think? about Whiplash in configuration menu has switch between 4meg and probably 8meg as chat told me on stream, but 8mb is not even show, i think this can be confusion since Speedy3D first introduced in v1000 and v1000 probably newer has 8mb?

I think they planned to support cards with more RAM as a forward thinking feature., but that option's probably hidden unless the card actually has 8 MB of RAM.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Reply 538 of 3188, by sharangad

Posted on 
User metadata
Rank l33t
Rank
l33t

Last one for today:

https://1drv.ms/u/s!As-dKk-N73dSmBwMo-Zu9Ad0nTvO
MD5: 76458c5015981fc931b33dae940efd2c

This doesn't do anything new, just fixes bugs. It would be nice to get results from a V1000 as well as a V2000.

I've ported some of the VESA info into DOSbox. At some point I'll have to create the project on sourceforge. But not just yet.

Developer of RReady - Rendition Verité Wrapper.
https://www.youtube.com/@sharangadayananda\
https://patreon.com/Rready

Go to top of page Go to top of page
Back to PC Emulation
Close window
Close window