VOGONS


Reply 440 of 459, by DenizOezmen

User metadata
Rank Member
Rank
Member
dm- wrote on 2025-02-06, 13:12:

Works perfect.

running Tualatin 1400S cpu on full speed w/o beeps -)

Glad to read that it works. Have fun. 😀

dm- wrote on 2025-02-06, 13:12:

btw: last jumper on the dip switch must be set off, it is also somehow affecting "beeping".

Maybe that has something to do with the intended usage of the signal pins of the PIIX by the stock BIOS. Some (like the THRM# one) can be re-purposed as general purpose I/O pins (which is what the mod now does).

myne wrote on 2025-02-06, 13:21:

Now to turn prochot (throttle) into a menu option 🤣

Is the goal to nerf the system or to have beautiful music constantly playing in the background? 😁

Reply 441 of 459, by myne

User metadata
Rank l33t
Rank
l33t

Throttle for dos!
Iirc it'll drop 75%.
Set fsb=66,cache disabled, cl3, and therm and it might be slow enough.
The noise might be harder to disable.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 442 of 459, by myne

User metadata
Rank l33t
Rank
l33t

Managed to find this

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 443 of 459, by myne

User metadata
Rank l33t
Rank
l33t

Btw Deniz...
I don't suppose you have ever documented what the bios uses the PIIX4 gpios for at all?
I have some idea, but maybe you know more

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 444 of 459, by myne

User metadata
Rank l33t
Rank
l33t

Dunno if this will help with this project, but I think I've figured out what the as97127f does - mostly.

Asus AS97127F ASIC reverse engineering

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 445 of 459, by DenizOezmen

User metadata
Rank Member
Rank
Member
myne wrote on 2025-02-14, 03:01:

Managed to find this

Cool, thanks. Interesting to see there's multiple variants of monitors included. Never thought this might be floating around. 😀

myne wrote on 2025-02-16, 05:48:

Btw Deniz...
I don't suppose you have ever documented what the bios uses the PIIX4 gpios for at all?
I have some idea, but maybe you know more

No, sorry ... I vaguely remember seeing manipulation of GP status bits when looking at APM event handlers, but I never got far with this.

Reply 446 of 459, by myne

User metadata
Rank l33t
Rank
l33t

It'd be nice to know which ones at least.
There's a few pins missing from my reverse engineering.
I have suspicions, but not confirmation

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 447 of 459, by Mr.Hunt

User metadata
Rank Newbie
Rank
Newbie
Mr.Hunt wrote on 2025-01-31, 08:32:

Hello all! Be careful with the bios for p2-99b it doesn't work, the system won't start after flashing.

Thanks for the info! I've checked the mod and couldn't find any obvious error. Do I understand correctly that the BIOS does not show any signs of life after flashing (i.e. no beeps, no VGA output)?
[/quote]

Hi! Yes, no beeps, no output video. I restored to previos image of bios by using another board at hot swap (haven't special device), and after motherboard start to work. I do not know maybe revision of motherboard must be another ? Today think to flash bios for p3b-f, scary 😀

Reply 448 of 459, by SWZSSR

User metadata
Rank Newbie
Rank
Newbie

So I just picked up an ASUS CUV266-D

Board is missing tualatin microcode just like the CUV4X-D. Would you make an updated bios down the track?

Last edited by SWZSSR on 2025-06-02, 13:25. Edited 2 times in total.

LS486/5x86@180/Banshee/SoundscapeElite/DOS6.22
5TH/Dual233MMX/MGA2164W/Voodoo2/AWE64Gold/NT4.0&W9X
P5A(1.6)/K6-3+550/Ti500/EWS64XL/W9X
CUV266D/Dual1.4TUAL/HD4670AGP/XONAR/XP
780iFTW/QX9650/3x8800U/VISTAx64
Z87/4790K/TITANX/AuzBravura/XPx86

Reply 449 of 459, by dm-

User metadata
Rank Member
Rank
Member

Hello,
Just got in my hands original P2B-DS and i tested a bios...

It does not work correct with 2 cpu. Second CPU being super slow. like 386. First cpu running at full speed.

Same behaviour for HP E60 version -( second CPU slow.

reverting to original beta 1014 fix the bug.

ps.

P3B-F bios also looks like has a bug: CPU voltage can not be adjusted. It's always set as CPU wants.

Reply 450 of 459, by erazortt

User metadata
Rank Newbie
Rank
Newbie
dm- wrote on 2025-04-06, 10:04:

P3B-F bios also looks like has a bug: CPU voltage can not be adjusted. It's always set as CPU wants.

I have the P3B-F 1.04 and I am quite sure that the CPU voltage settings works for me. What makes you think that it does not work?

Reply 451 of 459, by dm-

User metadata
Rank Member
Rank
Member

i have 2 P3B-F and both boards does not regulate voltages from bios.
board always set voltage according to cpu pins configuration.

Reply 452 of 459, by overdrive333

User metadata
Rank Newbie
Rank
Newbie
DenizOezmen wrote on 2025-02-01, 08:58:

Thanks for the info! I've checked the mod and couldn't find any obvious error. Do I understand correctly that the BIOS does not show any signs of life after flashing (i.e. no beeps, no VGA output)?

I have a P2-99B. Could you post the BIOS again, I'll check it.

Reply 453 of 459, by DenizOezmen

User metadata
Rank Member
Rank
Member

Sorry for the late replies.

dm- wrote on 2025-04-06, 10:04:

It does not work correct with 2 cpu. Second CPU being super slow. like 386. First cpu running at full speed.

Weird. I already had a confirmation of the mod working. I'll try and check if something broke in the meantime.

dm- wrote on 2025-04-06, 10:04:

P3B-F bios also looks like has a bug: CPU voltage can not be adjusted. It's always set as CPU wants.

Where are you checking the voltage? Remember that the custom voltage is not applied until after POST, i.e. if you check the voltage in the BIOS setup itself, you will most likely see the CPU's stock voltage. (The only time you'll see the custom voltage in the BIOS itself is after a warm boot.)

SWZSSR wrote on 2025-04-03, 15:24:

So I just picked up an ASUS CUV266-D

I assume you already had reached out via email? If it wasn't you, there's a build on the download page. 😀

overdrive333 wrote on 2025-10-28, 16:11:

I have a P2-99B. Could you post the BIOS again, I'll check it.

I'll send you a DM, thanks.

Reply 454 of 459, by MadYoshi

User metadata
Rank Newbie
Rank
Newbie

Today I was working with the TUV4X. The result is that all TUV4X BIOS versions have some kind of flaw.

Versions 1003, 1004 (Beta), and 1005 were extremely unstable. The memory only ran at 133 and 100 MHz in CL3 mode; as soon as even one timing value was changed, it froze. Only 66 MHz ran with CL2. I don't understand it. Here's an example result for the three versions; it was largely identical.

The attachment Memory_1005_CL3.JPG is no longer available

Version 1006 (Beta, your mod) was "okay". However, when "7ns (143MHz)" was set under SDRAM Configuration, the BIOS displayed 2-2-2-5, but Windows only ever showed 3-2-2-6. The BIOS simply refuses to set the CL2 value. Even with "User Define," the CL2 value isn't applied after booting. And now it gets interesting. With the "by SPD" setting, the BIOS displays 2-2-2-6. After booting, however, it shows 2-3-3-6. Another difference is that, even though the "Memory Interleave Enabler" is installed, only "2-way" is displayed with "7ns", "8ns" and "User Define". But when "by SPD" is selected, Bank Interleave is set to "4-way", as it should be. Quite a mess, in my opinion.

The values ​​with the "7ns (143MHz)" setting in the 1006 BIOS:

The attachment Memory_1006_7ns.JPG is no longer available

The values ​​with the "by SPD" setting in the 1006 BIOS:

The attachment Memory_1006_SPD.JPG is no longer available

Now to version 1002. BIOS version 1002 at least sets the SDRAM configuration correctly. CL2 is indeed CL2. Except for the bank interleave oddity described above. "4-way" is only applied under "by SPD".

The values ​​with the "7ns (143MHz)" setting in the 1002 BIOS:

The attachment Memory_1002_7ns.JPG is no longer available

The values ​​with the "by SPD" setting in the 1002 BIOS:

The attachment Memory_1002_SPD.JPG is no longer available

My question is, could you modify your 1006 Beta Version in this way, that it will set the CL2 Value by selecting "7ns" or "User Define" and when "7ns" or "User Define" is selected, then also "4-way" Bank Interleave?

Reply 455 of 459, by hydraphone

User metadata
Rank Newbie
Rank
Newbie

Hi Deniz, this is great work!
I was wondering if these patches could be applicable for the ASUS CUV-NT as well, which has a VIA Apollo 133A chipset (similar to CUV4X but has a VIA 596B southbridge)? The latest BIOS for this motherboard can be found here https://theretroweb.com/motherboards/s/asus-cuv-nt-hp-oem

Reply 456 of 459, by shevalier

User metadata
Rank Oldbie
Rank
Oldbie

Hi Deniz!
May I make a request?
http://www.x86-secret.com/articles/tweak/i815twken.htm
Some guys from France created the famous modified BIOS for TUSL2-C.
Is it also possible to move the boot menu to F10?
1012 Beta 002

Aopen MX3S, PIII-S Tualatin 1133, Radeon 9800Pro@XT BIOS, Audigy 4 SB0610
JetWay K8T8AS, Athlon DH-E6 3000+, Radeon HD2600Pro AGP, Audigy 2 Value SB0400
Gigabyte Ga-k8n51gmf, Turion64 ML-30@2.2GHz , Radeon X800GTO PL16, Diamond monster sound MX300

Reply 457 of 459, by Maraakate

User metadata
Rank Oldbie
Rank
Oldbie

A few things:

I needed to downgrade my Asus P3B-F to v1006. This became a real adventure as I forgot how I upgraded it in the past. The answer is that you NEED the AFLASH.EXE utility. UNIFLASH, AWDFLASH899, AWDFLASH7xx, and their windows utilities did not work. Fortunately, theretroweb had it and you can grab it here: https://theretroweb.com/motherboard/miscfile/ … 3d634134183.zip

The v1006 is required for some AGP cards that will not be detected properly. Is it possible to also add the microcode updates to the 1006 BIOS? The final version of the 1006 BIOS is located here: https://theretroweb.com/motherboard/bios/bx3f … 1a593361360.zip

Reply 458 of 459, by Aubricks

User metadata
Rank Newbie
Rank
Newbie

Hi Deniz,

Just wanted to leave a thank you note here. Thank you for all your work, you have made me very happy today. Have been looking around for a long time to get proper CPU recognition on my CUV4X board.

I am using the ASUS CUV4X with a Lin-Lin adapter. I am running a Tualatin Pentium 3-S with 1.26 GHz successfully on my rev 1.03 board. The CPU is correctly recognized, thanks to your work.

I have used the version that you have provided : 1010 Beta 003.

Reply 459 of 459, by BitsUndBolts

User metadata
Rank Newbie
Rank
Newbie

Hello all,

I am currently working on an HP NetServer E60 board and needed a BIOS for my dual HAWK 370 setup.
It has been a long time since I visited this thread, but I would like to contribute a BIOS for this specific board.

file.php?mode=view&id=251999

Based on @DenizOezmen work, here are the changes:
★ The 2nd CPU now runs at full speed. Before, it was about 200× slower. This was a bug in the BIOS (the bigger microcode set overwrote the memory size handed to CPU 2, so CPU 2 ran all RAM uncached).
★ No more CPU throttling and no continuous beep (the PIIX4 thermal pin is switched off during POST; the VOGONS fix for it never ran on the E60, and the thermal alarm is silenced).
★ The onboard SCSI works on both channels/Phoenix SCSI BIOS migrated (HP’s own AIC-7895 SCSI BIOS 2.11.HP, loaded from the E60’s SCSI location instead of the P2B-DS one).
★ All PCI slots, the SCSI and the NIC get the correct IRQs in DOS and in Windows, in both PIC and APIC mode (all three of the BIOS’s IRQ routing tables rewritten for the E60’s wiring).
★ Windows 2000 runs as a dual-CPU system (“ACPI Multiprocessor PC”). 2x HAWK 370 with Tualatin Pentium III-S 1050 MHz (still need to switch the clock chip for 133 MHz).
★ The BIOS never writes the flash chip while running, which protects the boot block and gets rid of the “Can’t Write ESCD” error (no ESCD/DMI updates; Award’s flash code only knows 2-Mbit chips).
★ It runs on the E60’s original 4-Mbit AM29F040B chip, so no chip swap is needed (the image is stored in both halves).
★ DIP switch 3 clears the passwords and switch 4 clears CMOS, just like on the HP BIOS, and both work before the password prompt (read from two PIIX4 input pins).
★ HP NetServer E60 branding on the POST screen and in the Setup header.
★ Award/ASUS flash tools now refuse a stock P2B-DS BIOS, which prevents accidental cross-flashing (BIOS ID changed to “…-HP-E60”). You can use the provided flasher to flash the old BIOS back.
★ The useless “CPU Temperature N/A” box is gone from the Power Management page (the E60 has no hardware monitor chip).

You can use the E60FLASH.EXE to flash the Phoenix or the patched E60_06.512 BIOS.
To flash:

 E60FLASH E60_06.512 

file.php?mode=view&id=251998

Only restart after you see: "Done, the chip matches the file."
If there is an issue, a backup of your current BIOS was saved as E60BAK.BIN

It would be great to get some feedback regarding SCSI (I don't have drives) and other functions.